Home / Guest Author / Materials & Applications / Borophene – A New Chapter in the Development of 2D Materials

Borophene – A New Chapter in the Development of 2D Materials

Synthesized for the first time in 2015, borophene, an anatomically thin, crystalline 2D boron sheet has already captured the attention of scientists globally. Described as ‘the new wonder material’ due to its unique anisotropic flexibility and metallicity, it has the potential to revolutionize batteries, sensors and catalytic chemistry. This article summarises the synthesis, properties and potential applications of borophene.

Synthesis and Properties

Hands of scientific showing a piece of graphene with hexagonal molecule

Whilst graphene takes a single form, borophene is a polymorph, which can have many lattice configurations. Theoretically, there may be more than 1000 forms of borophene, each with different characteristics. Borophene was first synthesized by an international group of scientists under ultrahigh vacuum conditions using a solid boron atomic source. An atomically cleaned silver substrate was used to provide a well-defined and inert surface for borophene growth. In situ electronic characterization supported theoretical predictions that the polymorph of borophene they had successfully fabricated was metallic and formed planar structures with anisotropic corrugation. Its undulated structure was later attributed to the very small bending stiffness of borophene (i.e. the moment required to produce unit rotation) and its reactivity towards silver. The authors demonstrated that both the electronic and mechanical properties of the borophene produced were highly anisotropic.

Chemical element of the periodic table - Boron / Borophene "the new wonder material"

Since its initial discovery, numerous studies have been conducted into the superconductivity, mechanical, electronic, and optical properties of different polymorphs of borophene. Borophene has now been fabricated using a number of different substrates including goldcopper and aluminium. A significant breakthrough came in 2019 when freestanding borophene was synthesized for the first time using a scalable process.

Borophene is strong, flexible and transparent. It is a good conductor of both heat and electricity, and it also superconducts.  According to some computational predictions, borophene may transition to superconductivity at higher temperatures than graphene. First-principle calculations have indicated that the superconducting transition temperature may be as high as 24.7K for some polymorphs of borophene, which is much higher than the computationally predicted 8.1K and experimentally observed 7.4K in graphene. The anisotropy in its mechanical and electrical properties makes it tunable, which is amongst the reasons scientists and engineers are excited about its potential applications.  Understanding how to characterize and control the atomic structure of borophene will be crucial to the incorporation of borophene with the desired properties into products.

Whilst many researchers are excited about the unique properties of borophene, there are significant barriers to the commercialization of this material. Firstly, borophene has relatively high chemical reactivity and can, therefore, be difficult to manipulate at ambient temperatures. It remains relatively difficult to manufacture even in small quantities. Like many 2D materials, borophene is prone to oxidation. This is generally considered disadvantageous, however, the oxidation can be used to improve the stability of the structure and to tailor its properties.

Subscribe to Matmatch blog

Applications of Borophene

A wide range of applications harnessing the unique properties of borophene are already emerging, for example:

Flexible electronics: 2D materials may enable the development of scaled-down hybrid electronic devices designed to harness their superior qualities. Researchers believe that borophene’s unusual undulating structure would confer high stretchability if the borophene was transferred to an elastomeric substrate. In other words, it may be possible to fabricate devices using borophene that can be deformed and then return to their original shape. Since borophene is conductive, it may prove highly suitable for flexible electronic devices. One of the key challenges facing researchers is that like many 2D materials, borophene is highly sensitive to the external environment, and to date, it has not shown long-term stability and reliability when utilized in electronic devices. Researchers are currently developing new imaging techniques to capture the motion of individual atoms in 2D materials in order to understand the potential failure modes in electronic devices.

Flexible printed electric circuit

Battery electrodes: Lithium-ion batteries have become ubiquitous in electronic devices due to their high power density and long cycle life. In recent years, sodium-ion batteries have also become increasingly common due to their low operating cost and high operating safety. The unique morphology of 2D materials enables fast ion diffusion and makes them suitable candidates for use as electrodes. Borophene is a highly promising electrode material for lithium-ion and sodium-ion batteries due to its high storage capacity resulting in extremely high power density and electrochemical performance. A recent study reported that the storage capacity of borophene is the highest of all the 2D materials investigated to date.

Li-Ion electric vehicle battery concept. Car symbol with EV batteries on wooden desk

Catalysis: 2D materials show great promise for use as catalysts due to their unique properties, including large surface areas and novel electronic states. Borophene can be used as a catalyst in hydrogen evolution, oxygen reduction and the electrochemical reduction of carbon dioxide. The electrochemical reduction of carbon dioxide, in particular, has enormous potential in contributing towards efforts to address climate change. However, progress has been slow as a consequence of the lack of stable and efficient catalysts.

Hydrogen storage: Hydrogen has the highest energy per mass of any fuel. In recent years, research into hydrogen storage systems has become increasingly prevalent, driven by demand for energy storage and the advancement of hydrogen and fuel cell technologies. Borophene has been shown to have impressive hydrogen storage capacity, in part due to the low mass of the boron atoms. The binding energy of molecular hydrogen to the boron sheet is stronger than that to graphene.

Gas sensors: The gas adsorption properties of borophene render it suitable in gas sensing applications for different gases including ethanol, carbon monoxide, phosgene and formaldehyde. 2D materials have demonstrated significant potential for the development of gas sensors due to their unique electronic structures and large surface-area-to-volume ratios.

Subscribe to Matmatch Blog

Conclusions

Graphene

The development of 2D materials is one of the most exciting frontiers in materials research today. The computationally guided synthesis of borophene, just over a decade after the synthesis of graphene, can be considered as a blueprint for the development of new 2D materials. Significant technical challenges remain in the development of borophene, for example, scaling up manufacturing processes, however its unprecedented and unique qualities are likely to reveal new horizons in flexible electronics, battery, and sensor technology.

"I am excited to have the opportunity to share my passion for materials engineering with the global scientific and engineering community through writing articles for Matmatch."
Katie Atkinson
Katie Atkinson
PhD in Photonics, Materials Engineer
Subscribe to Matmatch blog

*This article is the work of the guest author shown above. The guest author is solely responsible for the accuracy and the legality of their content. The content of the article and the views expressed therein are solely those of this author and do not reflect the views of Matmatch or of any present or past employers, academic institutions, professional societies, or organizations the author is currently or was previously affiliated with.

References:

 1 MIT, ‘Sorry, graphene – borophene is the new wonder materials that’s got everyone excited’ (MIT Technology Review, 5 April 2019) <https://www.technologyreview.com/2019/04/05/239331/borophene-the-new-2d-material-taking-chemistry-by-storm/> accessed 18 April 2020

2 Rongting Wu, Adrian Gozar and Ivan Božović, ‘Large-area borophene sheets on sacrificial Cu(111) films promoted by recrystallization from subsurface boron (NPJ Quantum Materials, 2 August 2019) <https://www.nature.com/articles/s41535-019-0181-0> accessed on 9 May 2020

3 Mike Williams, ‘2D borophene gets a closer look’ (Rice University News, 11 April 2019) <https://news.rice.edu/2019/04/11/2d-borophene-gets-a-closer-look-2/> accessed on 7 May 2020

4 Andrew Mannix, ‘Synthesis of borophenes: Anisotropic, two-dimensional boron polymorphs’ (Science, 18 December 2015) < https://science.sciencemag.org/content/350/6267/1513.full> accessed on 9 May 2020

5 Zhuhua Zhang et al., ‘Substrate-induced nanoscale undulations of borophene on silver’ (Nano Letters, 22 September 2016) <https://pubs.acs.org/doi/10.1021/acs.nanolett.6b03349> accessed on 19 May 2020 and Adam Brotchie, ‘Borophene: Served on a silver platter’ (Nature Review Materials, 18 October 2016) <https://www.nature.com/articles/natrevmats201683> accessed on 19 May 2020

6 Andrew J.Mannix, ‘Synthesis of borophenes: Anisotropic, two-dimensional boron polymorphs’ (Science, 18 December 2015) <https://science.sciencemag.org/content/350/6267/1513.full> accessed on 9 May 2020

7 Brian Kiraly, ‘Borophene Synthesis on Au(111)’, (ACS Nano, 7 March 2019) <https://pubs.acs.org/doi/10.1021/acsnano.8b09339> accessed on 7 May 2020

8 Rongting Wu, Adrian Gozar and Ivan Božović, ‘Large-area borophene sheets on sacrificial Cu(111) films promoted by recrystallization from subsurface boron’ (NPJ Quantum Materials, 2 August 2019) accessed on 9 May 2020

9 Wenbin Li et al., ‘Experimental realization of honeycomb borophene’ (Science Bulletin, 15 March 2018) <https://www.sciencedirect.com/science/article/pii/S2095927318300707> accessed on  8 May 2020

10 Michael Berger, ‘Freestanding borophene synthesized for the first time’ (Nanowerk Spotlight, 14 May 2019) <https://www.nanowerk.com/spotlight/spotid=52794.php> accessed on 19 May 2020

11 John Wenz, ‘Move over Graphene: Next-Gen 2D Materials Could Revolutionize Technology’, (Knowable Magazine, 29 November 2019) <https://www.discovermagazine.com/the-sciences/move-over-graphene-next-gen-2d-materials-could-revolutionize-technology> accessed on 19 May 2020

 12 Miao Gao et al., ‘Prediction of phonon-mediated superconductivity in borophene’, (Phys Rev B, 10 January 2017) <https://journals.aps.org/prb/abstract/10.1103/PhysRevB.95.024505>  accessed on 19 May 2020

13 MIT, ‘Sorry, graphene – borophene is the new wonder materials that’s got everyone excited’ (MIT Technology Review, 5 April 2019)  <https://www.technologyreview.com/2019/04/05/239331/borophene-the-new-2d-material-taking-chemistry-by-storm/> accessed 18 April 2020

14 Dexter Johnson, ‘Borophene takes big steps towards electronic devices’, (IEEE Spectrum, 23 February 2017) <https://spectrum.ieee.org/nanoclast/semiconductors/materials/borophene-takes-big-step-towards-electronic-devices> accessed on 19 May 2020

15 Mike Williams, ‘2D borophene gets a closer look’ (Rice University News, 11 April 2019) <https://news.rice.edu/2019/04/11/2d-borophene-gets-a-closer-look-2/> accessed on 7 May 2020

16 Chengyong Zhong et al., ‘Two-dimensional honeycomb borophene oxide: Strong anisotropy and nodal loop transformation’, <https://arxiv.org/ftp/arxiv/papers/1810/1810.03009.pdf>

17 Adam Brotchie, ‘Borophene: Served on a silvery platter’, (Nature Review Materials, 18 October 2016) <https://www.nature.com/articles/natrevmats201683 and https://phys.org/news/2016-10-d-boron-flexible-electronics.html> accessed on 19 May 2020

18 The Graphene Council ‘Atomic dance reveals new insights into performance of 2D materials’ (The Graphene Council, 17 February 2020) <https://www.thegraphenecouncil.org/blogpost/1501180/340733/Atomic-dance-reveals-new-insights-into-performance-of-2D-materials> accessed on 6 May 2020

19 Xiaoming Zhang et al., ‘Borophene as an extremely high capacity electrode material for Li-ion and Na-ion batteries’ (Nanoscale, 26 July 2016) <https://pubs.rsc.org/en/content/articlelanding/2016/nr/c6nr04186h#!divAbstract> accessed on 19 May 2020

20 Yong Wang et al., ‘Catalysis with Two-Dimensional Materials Confining Single Atoms: Concept, Design and Applications (Chemical Reviews, 21 December 2018) <https://pubs.acs.org/doi/10.1021/acs.chemrev.8b00501> accessed on 19 May 2020

21 Li Shi et al., ‘High intrinsic catalytic activity of two-dimensional boron monolayers for the hydrogen evolution reaction’ (Nanoscale, 6 December 2016), <https://pubs.rsc.org/en/content/articlelanding/2017/nr/c6nr06621f#!divAbstract> accessed on 19 May 2020 and Showkat Mir et al. ‘Two-dimensional boron: Lightest catalyst for hydrogen and oxygen evolution reaction’ (Applied Physics Letters, 2016) <https://aip.scitation.org/doi/abs/10.1063/1.4960102> accessed on 19 May 2020

22 Yashpal Singh et al., ‘Computational exploration of borophane-supported single transition metal atoms as potential oxygen reduction and evolution electrocatalysts’ (Physical Chemistry Chemical Physics, 24 July 2018) <https://pubs.rsc.org/en/content/articlelanding/2018/cp/c8cp03130d#!divAbstract> accessed on 6 May 2020

23 Jin-Hang Liu et al., ‘Efficient electrocatalytic reduction of carbon dioxide by metal-doped β12 borophene monolayers’ (RSC Advances, 3 September 2019) <https://pubs.rsc.org/en/content/articlelanding/2019/ra/c9ra04135d#!divAbstract> accessed on 19 May 2020

24 Fuel Cells Technologies Office, Hydrogen Storage <https://www.energy.gov/eere/fuelcells/hydrogen-storage> accessed on 7 May 2020

25 Zhi-Qiang Wang et al. ‘Review of borophene and its potential applications’ (Front. Phys.14(2), 23403 (2019)) <https://doi.org/10.1007/s11467-019-0884-5> accessed on 8 May 2020

26 Suleyman Er et al. ‘DFT Study of Planar Boron Sheets: A New Template for Hydrogen Storage’ (The Journal of Physical Chemistry C, 5 October 2009) <https://pubs.acs.org/doi/10.1021/jp9077079> accessed on 10 May 2020

27 V. Nagarajan et al., ‘Borophene nanosheet molecular device for detection of ethanol – A first-principles study’ (Computational and Theoretical Chemistry, 2017) <https://www.infona.pl/resource/bwmeta1.element.elsevier-e44bba48-e2f0-380c-99a1-f7de8998adb1> accessed on 9 May 2020

28 Vivekanand Shukla et al. ‘Toward the Realization of 2D Borophened Based Gas Sensor’ (J. Phys. Chem. C, 10 November 2017), <https://pubs.acs.org/doi/10.1021/acs.jpcc.7b09552> accessed on 19 May 2020

29 Khushboo Patel et al., ‘A new flatland buddy as toxic gas scavenger: A first principles study’ (Journal of Hazardous Materials, 5 June 2018) <https://www.sciencedirect.com/science/article/abs/pii/S030438941830150X> accessed on 19 May 2020

30 Amirhossein Shahbazi Kootenaei et al., ‘B36 borophene as an electronic sensor for formaldehyde: Quantum chemical analysis’, (Phys. Lett. A, 6 August 2016) <https://www.sciencedirect.com/science/article/abs/pii/S0375960116303218> accessed on 19 May 2020

31 Andrew Mannix et al., ‘Borophene as a prototype for synthetic 2D materials development’ (Nature Nanotechnology, 6 June 2018) <https://www.nature.com/articles/s41565-018-0157-4?proof=true&platform=oscar&draft=collection> accessed on 7 May 2020

32 MIT, ‘Sorry, graphene – borophene is the new wonder materials that’s got everyone excited’ (MIT Technology Review, 5 April 2019)  <https://www.technologyreview.com/2019/04/05/239331/borophene-the-new-2d-material-taking-chemistry-by-storm/> accessed 18 April 2020