Eigenschaften
Allgemein
| Property | Temperature | Value | Comment |
|---|---|---|---|
Dichte | 20.0 °C | 1.1 - 1.14 g/cm³ Show Supplier Material materials with Dichte of 1.1 - 1.14 g/cm³ | ISO 1183 |
Mechanisch
| Property | Temperature | Value | Comment | ||
|---|---|---|---|---|---|
Dehnung | 20.0 °C | 22 - 24 % Show Supplier Material materials with Dehnung of 22 - 24 % | ISO 527-1/-2 | ||
Elastizitätsmodul | 20.0 °C | 2 - 2.4 GPa Show Supplier Material materials with Elastizitätsmodul of 2 - 2.4 GPa | ISO 527-2 | ||
Schlagfestigkeit, Charpy gekerbt | 20.0 °C | 16 - 24 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 16 - 24 kJ/m² | ISO 179/1eA | ||
Zugfestigkeit | 20.0 °C | 40 - 50 MPa Show Supplier Material materials with Zugfestigkeit of 40 - 50 MPa | ISO 527-1/-2 | ||
Schlagzähigkeit, Charpy ungekerbt | No Break, ISO 179/1eA | ||||
Thermisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Aschegehalt | 20.0 °C | 2 % Show Supplier Material materials with Aschegehalt of 2 % | Maximum |
Rheological Properties
| Property | Value | Comment |
|---|---|---|
Schmelzvolumenflussrate | 25 - 35 cm³/10min Show Supplier Material materials with Schmelzvolumenflussrate of 25 - 35 cm³/10min | ISO 1133, 260°C/5Kg |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Car trim parts, Interior cases | |
| Fillers | 65% Talc | |
| Processing methods | Pre-drying 4 hours/95-110°C | |