Das Material: 'Beryllium Copper (BECOL-25) TD04', nach dem Sie gesucht haben, wurde durch das untenstehende ersetzt.
Eigenschaften
Allgemein
| Property | Temperature | Value |
|---|---|---|
Dichte | 23.0 °C | 8.26 g/cm³ Show Material materials with Dichte of 8.26 g/cm³ |
Mechanisch
| Property | Temperature | Value |
|---|---|---|
Dehnung | 23.0 °C | 2 % Show Material materials with Dehnung of 2 % |
Elastizitätsmodul | 23.0 °C | 130 GPa Show Material materials with Elastizitätsmodul of 130 GPa |
Härte, Rockwell C | 23.0 °C | 37 - 45 [-] Show Material materials with Härte, Rockwell C of 37 - 45 [-] |
Schubmodule | 23.0 °C | 50 GPa Show Material materials with Schubmodule of 50 GPa |
Streckgrenze Rp 0,2 | 23.0 °C | 1000 - 1100 MPa Show Material materials with Streckgrenze Rp 0,2 of 1000 - 1100 MPa |
Zugfestigkeit | 23.0 °C | 1210 - 1482 MPa Show Material materials with Zugfestigkeit of 1210 - 1482 MPa |
Thermisch
| Property | Temperature | Value |
|---|---|---|
Wärmeleitfähigkeit | 23.0 °C | 84 - 130 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 84 - 130 W/(m·K) |
Elektrisch
| Property | Temperature | Value |
|---|---|---|
Specific Electrical conductivity | 25 % IACS Show Material materials with Specific Electrical conductivity of 25 % IACS | |
spezifischer Widerstand | 23.0 °C | 7.9E-8 Ω·m Show Material materials with spezifischer Widerstand of 7.9E-8 Ω·m |
Chemical properties
Technological properties
| Property | ||
|---|---|---|
| Application areas | Aerospace: Landing gear, bearing bushes and high performance fasteners;Automotive: Valve guides, bushes and valve seats;Offshore & marine: Offshore drilling and instrumentation equipment, downhole tooling, valve, pump and shaft components;Other: Deep drawing tooling, plastic moulding dies, tools and plungers, die-casting plunger tips, non-magnetic and non sparking tools, electrical and electronic connectors, springs, fasteners, switchgear, resistance welding electrodes and equipment, flash butt welding dies and inserts, seam welding electrode shafts | |
| Corrosion properties | High corrosion resistance | |
| General machinability | Very good machinability | |