Eigenschaften
Allgemein
| Property | Value |
|---|---|
Dichte | 6.5 g/cm³ Show Supplier Material materials with Dichte of 6.5 g/cm³ |
Kornstruktur | Titanium carbide + martensite |
Mechanisch
| Property | Value |
|---|---|
Biegefestigkeit | 1050 MPa Show Supplier Material materials with Biegefestigkeit of 1050 MPa |
Druckfestigkeit | 3700 MPa Show Supplier Material materials with Druckfestigkeit of 3700 MPa |
Elastizitätsmodul | 290 GPa Show Supplier Material materials with Elastizitätsmodul of 290 GPa |
Härte, Rockwell C | 67 [-] Show Supplier Material materials with Härte, Rockwell C of 67 [-] |
Schubmodule | 116 GPa Show Supplier Material materials with Schubmodule of 116 GPa |
Thermisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Koeffizient der thermischen Ausdehnung | 400 °C | 9.7e-06 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 9.7e-06 1/K | for 20°C to the mentioned temperature |
Wärmeleitfähigkeit | 18.8 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 18.8 W/(m·K) |
Elektrisch
| Property | Value |
|---|---|
spezifischer Widerstand | 7.7e-07 Ω·m Show Supplier Material materials with spezifischer Widerstand of 7.7e-07 Ω·m |
Magnetisch
Chemical properties
Technological properties
| Property | ||
|---|---|---|
| Application areas | In heat-treated, hardened condition (up to 69 HRC), Ferro-Titanit® can be used to solve many wear problems economically. | |
| Corrosion properties | Because of its high chromium and reduced carbon content, this grade is recommended in cases requiring elevated corrosion resistance. | |
| General machinability | In as-delivered condition, this material can be machined by conventional methods. | |
| Heat Treatment | Soft annealing: 750°C, 10 hr (Cooling in furnace) Hardness: 51 HRC - Stress-relief-annealing: 600-650°C (cooling in Furnace) - Hardening: 1080°C and quenching in vacuum (1 bar N2) - Temepering 180°C (Hardness:67 HRC) | |