Polyphthalamide (PPA) HT03 GFR 60 BK Q1G001

Alternative und Handelsbezeichungen
PA66/6I/X-GF60

Want to keep this datasheet? Save it now in your required format

Description

Partially Aromatic copolyamide with a combination of semi-crystalline polyamide reinforced with 60% Glass fiber, heat stabilized and lubricated for injection molding process.

Eplamid HT03 grades offer the following unique properties in general conditions, and even after moisture absorption: Good Surface Finish, Good Dimensional Stability, Good High Temperature Properties, Good Chemical Resistance to Glycols and Oils and Excellent Creep Resistance. Eplamid HT03 grades are used for molding technical parts where higher operating temperatures and higher stiffness in moist environments are required.

Diese Materialdaten wurden von Epsan zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	1.7 g/cm³ Show Supplier Material materials with Dichte of 1.7 g/cm³	ISO 1183
Water content	23.0 °C	0.1 % Show Supplier Material materials with Water content of 0.1 %	ISO 15512

Mechanisch

Property	Temperature	Value	Comment
Dehnung	23.0 °C	2 % Show Supplier Material materials with Dehnung of 2 %	ISO 527-2 (5mm/min)
Elastizitätsmodul	23.0 °C	22.1 GPa Show Supplier Material materials with Elastizitätsmodul of 22.1 GPa	ISO 527-2 (1mm/min)
Hardness, Ball Indentation	23.0 °C	280 MPa Show Supplier Material materials with Hardness, Ball Indentation of 280 MPa	ISO 2039-1
Schlagfestigkeit, Charpy gekerbt	-30.0 °C	13 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 13 kJ/m²	ISO 179/1eA
	23.0 °C	14 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 14 kJ/m²	ISO 179/1eA

Schlagzähigkeit, Charpy ungekerbt	23.0 °C	90 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Charpy ungekerbt of 90 kJ/m²	ISO 179/1eU
Zugfestigkeit	23.0 °C	260 MPa Show Supplier Material materials with Zugfestigkeit of 260 MPa	ISO 527-2 (5mm/min)

Thermisch

Property	Temperature	Value	Comment
Aschegehalt	23.0 °C	60 % Show Supplier Material materials with Aschegehalt of 60 %	ISO 3451-4
Heat deflection temperature, 1.80 MPa		235 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 235 °C	ISO 75-2/A
Heat deflection temperature, 8.0 MPa		180 °C Show Supplier Material materials with Heat deflection temperature, 8.0 MPa of 180 °C	ISO 75-2/B
Max. Betriebstemperatur, kurz		215 °C Show Supplier Material materials with Max. Betriebstemperatur, kurz of 215 °C	ISO 2578
Max. Betriebstemperatur, lang		110 °C Show Supplier Material materials with Max. Betriebstemperatur, lang of 110 °C	ISO 2578
Schmelzpunkt		260 °C Show Supplier Material materials with Schmelzpunkt of 260 °C	ISO 3146
Entflammbarkeit	UL94 (0.8mm) HB

Elektrisch

Property	Temperature	Value	Comment
Durchschlagfestigkeit	23.0 °C	33 kV/mm Show Supplier Material materials with Durchschlagfestigkeit of 33 kV/mm	IEC 60243-1
Kriechstromfestigkeit	23.0 °C	600 V Show Supplier Material materials with Kriechstromfestigkeit of 600 V	EN 60112

Rheological Properties

Property	Temperature	Value	Comment
Schrumpfung	23.0 °C	0.1 % Show Supplier Material materials with Schrumpfung of 0.1 %	ISO 294-4 (3mm)
Schrumpfung, diagonal	23.0 °C	0.3 % Show Supplier Material materials with Schrumpfung, diagonal of 0.3 %	ISO 294-4 (3mm)

Technological properties

Property
Application areas	Eplamid HT03 grades are used for molding technical parts where higher operating temperatures and higher stiffness in moist environments are required.
Fillers	60% Glass Fiber
Other	Laboratory conditions are 23 ±2°C and 45-55 % RH.

Polyphthalamide (PPA) HT03 GFR 60 BK Q1G001

Description

Ashby charts

Materialien von diesem Anbieter

Eigenschaften