Eigenschaften
Abmessung
| Property | Value | Comment |
|---|---|---|
Breite | 610 mm Show Supplier Material materials with Breite of 610 mm | max. |
Dicke | 0.5 - 6.25 mm Show Supplier Material materials with Dicke of 0.5 - 6.25 mm | |
Länge | 1830 mm Show Supplier Material materials with Länge of 1830 mm | max. |
Mechanisch
Chemical properties
| Property | Value | Comment |
|---|---|---|
Aluminium | 0.16 % Show Supplier Material materials with Aluminium of 0.16 % | max. |
Andere | 0.04 % Show Supplier Material materials with Andere of 0.04 % | max., other metallic impurities each |
Beryllium | 98 % Show Supplier Material materials with Beryllium of 98 % | min., BeO: 2% max |
Eisen | 0.18 % Show Supplier Material materials with Eisen of 0.18 % | max. |
Kohlenstoff | 0.15 % Show Supplier Material materials with Kohlenstoff of 0.15 % | max. |
Magnesium | 0.08 % Show Supplier Material materials with Magnesium of 0.08 % | max. |
Silizium | 0.08 % Show Supplier Material materials with Silizium of 0.08 % | max. |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Intelligence, surveillance and reconnaissance (ISR) systems, Electro-optical infrared (EO/IR) & targeting systems, Airborne early warning & control systems (AEW&C), Surveillance, reconnaissance and targeting (SRT), Size, weight and power (SWaP) replacement systems, Semiconductor capital equipment, Space-based systems and components, James Webb Space Telescope support structure | |
| Processing history | The standard condition of sheet shall be hot rolled, ground, stress relieved and etched. Rework of local areas may be performed within tolerances established by this specification. Surface finish shall be 63 microinches rms or finer. | |