ToughMet® 3CX CX105

Alternative und Handelsbezeichungen
ToughMet® 3 CX Alloy

Want to keep this datasheet? Save it now in your required format

Description

ToughMet 3 Alloy is Materion Performance Alloys’ solution to your severe service material problems. By applying our proprietary technology process to create the EquaCast® microstructure, tailored alloying additions and spinodal hardening technology, we have engineered ToughMet 3 Alloy to provide attributes beyond those typically found in a high-strength copper alloy. ToughMet 3 Alloy in the cast and spinodally hardened (CX) condition exhibits tensile strength up to 120 ksi and hardness up to HRC 34 in a Copper - 15% Nickel - 8% Tin alloy with excellent machinability.

Exceptional resistance to corrosion and cavitation

Outstanding lubricity and durability in demanding applications

Highly uniform composition in all product forms

Available in a wide range of continuous-cast shapes and sizes

Diese Materialdaten wurden von Materion Brush GmbH zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value
Dichte	23.0 °C	9 g/cm³ Show Supplier Material materials with Dichte of 9 g/cm³

Abmessung

Property	Value
Außendurchmesser	28.6 - 254 mm Show Supplier Material materials with Außendurchmesser of 28.6 - 254 mm
Innendurchmesser	12.7 - 76.2 mm Show Supplier Material materials with Innendurchmesser of 12.7 - 76.2 mm
Wall thickness	6.35 - 15.9 mm Show Supplier Material materials with Wall thickness of 6.35 - 15.9 mm

Mechanisch

Property	Temperature	Value	Comment
Dauerfestigkeit	23.0 °C	413 MPa Show Supplier Material materials with Dauerfestigkeit of 413 MPa	10⁶ cycles R=-1
Dehnung	23.0 °C	4 % Show Supplier Material materials with Dehnung of 4 %
Elastizitätsmodul	23.0 °C	144 GPa Show Supplier Material materials with Elastizitätsmodul of 144 GPa
Härte, Rockwell C	23.0 °C	30 [-] Show Supplier Material materials with Härte, Rockwell C of 30 [-]
Poissonzahl	23.0 °C	0.3 [-] Show Supplier Material materials with Poissonzahl of 0.3 [-]
Streckgrenze Rp 0,2	23.0 °C	652 - 724 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 652 - 724 MPa
Zugfestigkeit	23.0 °C	683 - 758 MPa Show Supplier Material materials with Zugfestigkeit of 683 - 758 MPa

Thermisch

Property	Temperature	Value
Koeffizient der thermischen Ausdehnung	23.0 °C	1.6E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.6E-5 1/K
Wärmeleitfähigkeit	23.0 °C	38 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 38 W/(m·K)

Elektrisch

Property	Value
Specific Electrical conductivity	9 % IACS Show Supplier Material materials with Specific Electrical conductivity of 9 % IACS

Magnetisch

Property	Temperature	Value
Relative magnetische Permeabilität	23.0 °C	1 [-] Show Supplier Material materials with Relative magnetische Permeabilität of 1 [-]

Chemical properties

Property	Value
Kupfer	Balance
Nickel	15 % Show Supplier Material materials with Nickel of 15 %
Zinn	8 % Show Supplier Material materials with Zinn of 8 %

Technological properties

Property
Application areas	ToughMet 3 CX alloy is used for wear plates, bushings, sleeve bearings, linear bearings and thrust bearings in industrial, off-road, mining and heavy equipment. It is also used for oil and gas drilling hardware.

ToughMet® 3CX CX105

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften