Alloy 360 MH8 (N03360)

Alternative und Handelsbezeichungen
Alloy 360

Want to keep this datasheet? Save it now in your required format

Description

Materion Performance Alloys’ nickel beryllium strip Alloy 360 (UNS number N03360) combines unique mechanical and physical properties.

Properties of nickel beryllium Alloy 360 strip that a designer can use include ultimate tensile strength approaching 300,000 psi (2000 MPa), yield strength up to 245,000 psi (1690 MPa), excellent formability, stress relaxation less than 5% at 400º F (200°C), and fatigue strength (in reverse bending) of 85,000-90,000 psi (586-655 MPa) at 10 million cycles. It has corrosion resistance surpassing stainless steel. Typically, this alloy is used for mechanical and electrical / electronic components that are subjected to elevated temperatures (up to 700º F / 370°C for short times), and require good spring characteristics at these temperatures.

Diese Materialdaten wurden von Materion Brush GmbH zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value
Dichte	23.0 °C	8.27 g/cm³ Show Supplier Material materials with Dichte of 8.27 g/cm³

Mechanisch

Property	Temperature	Value	Comment
Biegefähigkeit 90°, in longitudinaler Richtung	23.0 °C	1.2 [-] Show Supplier Material materials with Biegefähigkeit 90°, in longitudinaler Richtung of 1.2 [-]
Biegefähigkeit 90°, in transversaler Richtung	23.0 °C	1.6 [-] Show Supplier Material materials with Biegefähigkeit 90°, in transversaler Richtung of 1.6 [-]
Dehnung	23.0 °C	9 % Show Supplier Material materials with Dehnung of 9 %	min., for strip thicker than 0.10 mm
Elastizitätsmodul	23.0 °C	195 - 210 GPa Show Supplier Material materials with Elastizitätsmodul of 195 - 210 GPa
Streckgrenze Rp 0,2	23.0 °C	1170 - 1410 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 1170 - 1410 MPa
Zugfestigkeit	23.0 °C	1520 - 1690 MPa Show Supplier Material materials with Zugfestigkeit of 1520 - 1690 MPa

Thermisch

Property	Temperature	Value
Koeffizient der thermischen Ausdehnung	23.0 °C	1.45E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.45E-5 1/K
Schmelzpunkt		1195 - 1325 °C Show Supplier Material materials with Schmelzpunkt of 1195 - 1325 °C
Wärmeleitfähigkeit	23.0 °C	48 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 48 W/(m·K)

Elektrisch

Property	Temperature	Value
Specific Electrical conductivity		5 % IACS Show Supplier Material materials with Specific Electrical conductivity of 5 % IACS
spezifischer Widerstand	23.0 °C	3.45E-7 Ω·m Show Supplier Material materials with spezifischer Widerstand of 3.45E-7 Ω·m

Technological properties

Property
Application areas	Some applications for this alloy are Belleville washers for fire protection sprinkler heads, thermostats, bellows, diaphragms, connectors and burn-in and test sockets electrical /electronic systems.
Plating	Alloy 360 strip when properly cleaned exhibits surface chemistry characteristics similar to other commercial nickel base alloys. Techniques and procedures for plating and joining commercial nickel base alloys can be used on nickel beryllium.
Workability	Very Good - Used for moderately drawn and severely cupped parts; can be formed to a 90° angle around a radius

Alloy 360 MH8 (N03360)

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften