QMetᵀᴹ 300 Strip

Alternative und Handelsbezeichungen
QMetᵀᴹ 300
Want to keep this datasheet? Save it now in your required format

Description

Materion Performance Alloys’ QMet 300 strip is a high-performance, heat treated copper alloy designed to provide very high electrical and thermal conductivity while still retaining moderate strength. This non beryllium-containing alloy is idea for heat spreading structural components in consumer electronic devices as well as high reliability, high power electrical and electronic connectors.

Diese Materialdaten wurden von Materion Brush GmbH zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Eigenschaften

Allgemein

PropertyTemperatureValue

Dichte

23.0 °C

8.89 g/cm³

Show Supplier Material materials with Dichte of 8.89 g/cm³

Abmessung

PropertyValueComment

Dicke

0.2 - 0.8 mm

Show Supplier Material materials with Dicke of 0.2 - 0.8 mm

gauge

Mechanisch

PropertyTemperatureValueComment

Biegefähigkeit 90°, in longitudinaler Richtung

23.0 °C

0.2 [-]

Show Supplier Material materials with Biegefähigkeit 90°, in longitudinaler Richtung of 0.2 [-]

Biegefähigkeit 90°, in transversaler Richtung

23.0 °C

0.2 [-]

Show Supplier Material materials with Biegefähigkeit 90°, in transversaler Richtung of 0.2 [-]

Dehnung

23.0 °C

5 - 9 %

Show Supplier Material materials with Dehnung of 5 - 9 %

for strip thicker than 0.10 mm

Elastizitätsmodul

23.0 °C

137 - 152 GPa

Show Supplier Material materials with Elastizitätsmodul of 137 - 152 GPa

Härte, Vickers

23.0 °C

130 - 170 [-]

Show Supplier Material materials with Härte, Vickers of 130 - 170 [-]

Poissonzahl

23.0 °C

0.3 [-]

Show Supplier Material materials with Poissonzahl of 0.3 [-]

Streckgrenze Rp 0,2

23.0 °C

500 - 536 MPa

Show Supplier Material materials with Streckgrenze Rp 0,2 of 500 - 536 MPa

Zugfestigkeit

23.0 °C

538 - 558 MPa

Show Supplier Material materials with Zugfestigkeit of 538 - 558 MPa

Thermisch

PropertyTemperatureValue

Koeffizient der thermischen Ausdehnung

23.0 °C

1.8E-5 1/K

Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.8E-5 1/K

Wärmeleitfähigkeit

23.0 °C

341 W/(m·K)

Show Supplier Material materials with Wärmeleitfähigkeit of 341 W/(m·K)

Elektrisch

PropertyTemperatureValue

Elektrische Leitfähigkeit

23.0 °C

4.70E+7 S/m

Show Supplier Material materials with Elektrische Leitfähigkeit of 4.70E+7 S/m

Specific Electrical conductivity

78 - 81 % IACS

Show Supplier Material materials with Specific Electrical conductivity of 78 - 81 % IACS

Chemical properties

PropertyValueComment

Chrom

0.5 - 3 %

Show Supplier Material materials with Chrom of 0.5 - 3 %

Ni+Si+Cr

Kupfer

99.5 %

Show Supplier Material materials with Kupfer of 99.5 %

min.

Nickel

0.5 - 3 %

Show Supplier Material materials with Nickel of 0.5 - 3 %

Ni+Si+Cr

Silizium

0.5 - 3 %

Show Supplier Material materials with Silizium of 0.5 - 3 %

Ni+Si+Cr

Technological properties

Property
Application areas

Automotive Wire Harness Terminals and High Voltage Connectors, EV Charging Contacts, Appliance Power Contacts, Computer Power Contacts, Backplane, Midplane and Card Edge Connectors, Photovoltaic System Connectors, Heat Spreading for Consumer Electronics