Eigenschaften
Allgemein
| Property | Temperature | Value |
|---|---|---|
Dichte | 23.0 °C | 8.36 g/cm³ Show Supplier Material materials with Dichte of 8.36 g/cm³ |
Mechanisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Dauerfestigkeit | 23.0 °C | 310 MPa Show Supplier Material materials with Dauerfestigkeit of 310 MPa | 10⁷ cycles, R=-1 |
Dehnung | 23.0 °C | 15 % Show Supplier Material materials with Dehnung of 15 % | |
Elastizitätsmodul | 23.0 °C | 131 GPa Show Supplier Material materials with Elastizitätsmodul of 131 GPa | |
Härte, Rockwell C | 23.0 °C | 30 [-] Show Supplier Material materials with Härte, Rockwell C of 30 [-] | |
Kerbschlagenergie | 23.0 °C | 20 J Show Supplier Material materials with Kerbschlagenergie of 20 J | |
Streckgrenze Rp 0,2 | 23.0 °C | 760 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 760 MPa | |
Zugfestigkeit | 23.0 °C | 965 MPa Show Supplier Material materials with Zugfestigkeit of 965 MPa |
Thermisch
| Property | Temperature | Value |
|---|---|---|
Koeffizient der thermischen Ausdehnung | 23.0 °C | 1.75E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.75E-5 1/K |
Schmelzpunkt | 870 °C Show Supplier Material materials with Schmelzpunkt of 870 °C | |
Spezifische Wärmekapazität | 100.0 °C | 420 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 420 J/(kg·K) |
Wärmeleitfähigkeit | 100.0 °C | 155 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 155 W/(m·K) |
Chemical properties
| Property | Value |
|---|---|
Beryllium | 1.6 - 2 % Show Supplier Material materials with Beryllium of 1.6 - 2 % |
Kobalt | 0.2 - 0.3 % Show Supplier Material materials with Kobalt of 0.2 - 0.3 % |
Kupfer | Balance |
Technological properties
| Property | ||
|---|---|---|
| Application areas | MoldMAX LH alloy is used for injection mold cores and cavities where moderate hardness and high toughness and conductivity are required. | |