EtchMetᵀᴹ TM20 (C17200) Strip

Want to keep this datasheet? Save it now in your required format

Description

EtchMet alloy is a material that is tailor made for the springs in voice coil motors and optical image stabilization systems common in smart phone cameras. These devices have a relatively large mass (lense) suspended by extremely small, thin springs. The small size of the springs requires very high strength material to withstand shock loads when the phone is dropped or deliberately tapped against an NFC reader. Therefore, the springs must be made from a very robust material. Furthermore, the lack of a damping mechanism makes high spring stiffness important to combat vibration. EtchMet alloy provides a number of advantages that make it the ideal material for this application:


  • It has a uniform elastic modulus across all thicknesses/diameters and from product form to product form. This provides consistent stiffness and damping behavior which makes spring calculations easy.
  • It has a very high resilience allowing it to withstand impact loads without fracturing or permanently deforming.
  • It has high fatigue strength to withstand many drops and actuation cycles.
  • It has a uniform, primarily single-phase microstructure, which photochemically machines easily and cleanly for uniform edges free of stress risers.
  • It is supplied fully precipitation hardened so no further heat treatment is required.
  • It solders and welds readily.
  • EtchMet strip is inherently flat with minimal coil set, which helps with alignment during photochemical machining.
  • Diese Materialdaten wurden von Materion Brush GmbH zur Verfügung gestellt

    Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
    Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

    Ashby charts

    See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

    Eigenschaften

    Allgemein

    PropertyTemperatureValue

    Dichte

    23.0 °C

    8.36 g/cm³

    Show Supplier Material materials with Dichte of 8.36 g/cm³

    Abmessung

    PropertyValue

    Breite

    1.27 - 406.5 mm

    Show Supplier Material materials with Breite of 1.27 - 406.5 mm

    Dicke

    0.03 - 0.05 mm

    Show Supplier Material materials with Dicke of 0.03 - 0.05 mm

    Mechanisch

    PropertyTemperatureValueComment

    Dehnung

    23.0 °C

    1 %

    Show Supplier Material materials with Dehnung of 1 %

    min.

    Elastizitätsmodul

    23.0 °C

    131 GPa

    Show Supplier Material materials with Elastizitätsmodul of 131 GPa

    Härte, Vickers

    23.0 °C

    375 [-]

    Show Supplier Material materials with Härte, Vickers of 375 [-]

    min.

    Streckgrenze Rp 0,2

    23.0 °C

    1344 MPa

    Show Supplier Material materials with Streckgrenze Rp 0,2 of 1344 MPa

    min.

    Zugfestigkeit

    23.0 °C

    1379 MPa

    Show Supplier Material materials with Zugfestigkeit of 1379 MPa

    min.

    Thermisch

    PropertyTemperatureValue

    Koeffizient der thermischen Ausdehnung

    23.0 °C

    1.75E-5 1/K

    Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.75E-5 1/K

    Wärmeleitfähigkeit

    23.0 °C

    105 W/(m·K)

    Show Supplier Material materials with Wärmeleitfähigkeit of 105 W/(m·K)

    Elektrisch

    PropertyTemperatureValue

    Specific Electrical conductivity

    17 - 28 % IACS

    Show Supplier Material materials with Specific Electrical conductivity of 17 - 28 % IACS

    spezifischer Widerstand

    23.0 °C

    6.2E-6 - 1.01E-5 Ω·m

    Show Supplier Material materials with spezifischer Widerstand of 6.2E-6 - 1.01E-5 Ω·m

    Magnetisch

    PropertyTemperatureValueComment

    Relative magnetische Permeabilität

    23.0 °C

    1 [-]

    Show Supplier Material materials with Relative magnetische Permeabilität of 1 [-]

    max.

    Technological properties

    Property
    Application areas

    EtchMet alloy is a material that is tailor made for the springs in voice coil motors and optical image stabilization systems common in smart phone cameras.