High Density Polyethylene (HDPE)

Alternative und Handelsbezeichungen
Continuum™, Dowlex™, Purell®, Alathon®, Hostalen®, Lupolen®, Alfaten
Want to keep this datasheet? Save it now in your required format

Description

Depending on the grade food contact approved grades and heat stable grades are available. Its key features include:


  • Environmental stress crack resistance
  • High impact or impact modified with barrier properties
  • Good warpage properties
  • Diese Materialdaten wurden von M-Base zur Verfügung gestellt

    Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
    Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

    Ashby charts

    See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

    Eigenschaften

    Allgemein

    PropertyValue

    Dichte

    0.94 - 0.96 g/cm³

    Show Material materials with Dichte of 0.94 - 0.96 g/cm³

    Mechanisch

    PropertyValueComment

    Dehnung

    100.0 - 1000.0 %

    Show Material materials with Dehnung of 100.0 - 1000.0 %

    Elastizitätsmodul

    0.6 - 1.4 GPa

    Show Material materials with Elastizitätsmodul of 0.6 - 1.4 GPa

    Schlagfestigkeit, Charpy gekerbt

    6.0 - 50.0 kJ/m²

    Show Material materials with Schlagfestigkeit, Charpy gekerbt of 6.0 - 50.0 kJ/m²

    Schlagzähigkeit, Charpy ungekerbt

    10 kJ/m²

    Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 10 kJ/m²

    Zugfestigkeit

    14.0 - 32.0 MPa

    Show Material materials with Zugfestigkeit of 14.0 - 32.0 MPa

    at 8-12% strain

    Thermisch

    PropertyValue

    Koeffizient der thermischen Ausdehnung

    0.00012 - 0.0002 1/K

    Show Material materials with Koeffizient der thermischen Ausdehnung of 0.00012 - 0.0002 1/K

    Schmelzpunkt

    126.0 - 135.0 °C

    Show Material materials with Schmelzpunkt of 126.0 - 135.0 °C

    Spezifische Wärmekapazität

    2100.0 - 2700.0 J/(kg·K)

    Show Material materials with Spezifische Wärmekapazität of 2100.0 - 2700.0 J/(kg·K)

    Wärmeleitfähigkeit

    0.38 - 0.51 W/(m·K)

    Show Material materials with Wärmeleitfähigkeit of 0.38 - 0.51 W/(m·K)

    Entflammbarkeit

    UL 94 HB

    Elektrisch

    PropertyValue

    Dielektrizitätskonstante

    2.3 [-]

    Show Material materials with Dielektrizitätskonstante of 2.3 [-]

    2.5 [-]

    Show Material materials with Dielektrizitätskonstante of 2.5 [-]

    spezifischer Widerstand

    1000000000000000.0 Ω·m

    Show Material materials with spezifischer Widerstand of 1000000000000000.0 Ω·m

    Optisch

    PropertyValue

    Transparenz

    no

    Technological properties

    Property
    Application areas

    Fuel tanks, bottle cases, trash cans, gasoline canisters, beer crates, pipes, syringe plungers

    Other

    You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application:

    Polymer Advanced Search

    Processing methods

    Injection molding, blow molding, extrusion, compression molding