Epoxy MC511AF - Sheet

Alternative und Handelsbezeichungen
NEMA GRADE: G-11, U.L. LISTED: N
Want to keep this datasheet? Save it now in your required format

Description

MC511AF is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ᵒC. MC511AF is certifiable to MIL-I-24768/3, Type GEB.

Diese Materialdaten wurden von Norplex Micarta zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

Eigenschaften

Allgemein

PropertyValueTesting StandardComment

Bonding strength

997.9 Kg

Show Supplier Material materials with Bonding strength of 997.9 Kg

ASTM D229

Condition A

Dichte

1.91 g/cm³

Show Supplier Material materials with Dichte of 1.91 g/cm³

ASTM D792

Moisture absorption

0.09 %

Show Supplier Material materials with Moisture absorption of 0.09 %

ASTM D570

Condition A

Mechanisch

PropertyValueTesting StandardComment

Biegefestigkeit

206.8 MPa

Show Supplier Material materials with Biegefestigkeit of 206.8 MPa

ASTM D790

Condition E-1/150: T-150

393 MPa

Show Supplier Material materials with Biegefestigkeit of 393 MPa

ASTM D790

Condition A

Druckfestigkeit

344.7 MPa

Show Supplier Material materials with Druckfestigkeit of 344.7 MPa

ASTM D695

Condition A | Flatwise

Härte, Rockwell M

110 [-]

Show Supplier Material materials with Härte, Rockwell M of 110 [-]

ASTM D785

Impact strength, Izod unnotched, ASTM

534 J/m

Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 534 J/m

ASTM D256

Condition E-48/50

534 J/m

Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 534 J/m

ASTM D256

Condition E-48/50, Transverse

Scherfestigkeit

144.8 MPa

Show Supplier Material materials with Scherfestigkeit of 144.8 MPa

ASTM D732

Condition A, Transverse

Zugfestigkeit

282.7 MPa

Show Supplier Material materials with Zugfestigkeit of 282.7 MPa

ASTM D638

Condition A

Thermisch

PropertyValueComment

Glasübergangstemperatur

180 °C

Show Supplier Material materials with Glasübergangstemperatur of 180 °C

DMA

Relative temperature index, electrical

170 °C

Show Supplier Material materials with Relative temperature index, electrical of 170 °C

UL Bulletin 746b¹

Relative temperature index, mechanical strength

180 °C

Show Supplier Material materials with Relative temperature index, mechanical strength of 180 °C

UL Bulletin 746b¹

Arc resistance

185 seconds, ASTM D495, Condition A

Entflammbarkeit

UL Bulletin 94, Class HB

Elektrisch

PropertyValueFrequencyTesting StandardComment

Dielektrizitätskonstante

4.5 [-]

Show Supplier Material materials with Dielektrizitätskonstante of 4.5 [-]

1MHz

ASTM D150

Condition D-24/23

Durchschlagfestigkeit

21.65 kV/mm

Show Supplier Material materials with Durchschlagfestigkeit of 21.65 kV/mm

ASTM D149

Condition A

Durchschlagspannung

65 kV

Show Supplier Material materials with Durchschlagspannung of 65 kV

ASTM D149

Condition A

Kriechstromfestigkeit

600 V

Show Supplier Material materials with Kriechstromfestigkeit of 600 V

ASTM D3638

Verlustfaktor

0.019 [-]

Show Supplier Material materials with Verlustfaktor of 0.019 [-]

1MHz

ASTM D150

Condition D₁24/23

Technological properties

Property
Application areas

Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures.

Fillers

Glass Fabric

Other

1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use.

Supplier Disclaimer

This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values".


To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest.


It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.