Eigenschaften
Allgemein
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Dichte | 1.22 g/cm³ Show Supplier Material materials with Dichte of 1.22 g/cm³ | ASTM D792 | |
Moisture absorption | 1.25 % Show Supplier Material materials with Moisture absorption of 1.25 % | ASTM D570 | Condition D₁-24/23 |
Mechanisch
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Druckfestigkeit | 144.8 MPa Show Supplier Material materials with Druckfestigkeit of 144.8 MPa | ASTM D695 | Condition A |
Härte, Rockwell M | 80 [-] Show Supplier Material materials with Härte, Rockwell M of 80 [-] | ASTM D785 | |
Kompressionsmodul | 3.0 GPa Show Supplier Material materials with Kompressionsmodul of 3.0 GPa | ASTM D695 | Condition A |
Zugfestigkeit | 100.0 MPa Show Supplier Material materials with Zugfestigkeit of 100.0 MPa | ASTM D638 | Condition A |
Thermisch
| Property | Value | Comment | |
|---|---|---|---|
Relative temperature index, electrical | 130 °C Show Supplier Material materials with Relative temperature index, electrical of 130 °C | ¹ | |
Relative temperature index, mechanical strength | 130 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 130 °C | ¹ | |
Entflammbarkeit | UL Bulletin 94, Class HB, Condition A | ||
Elektrisch
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Durchschlagfestigkeit | 7.87 kV/mm Show Supplier Material materials with Durchschlagfestigkeit of 7.87 kV/mm | ASTM D149 | Condition D-48/50 |
15.74 kV/mm Show Supplier Material materials with Durchschlagfestigkeit of 15.74 kV/mm | ASTM D149 | Condition A |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Typical applications are as a replacement for RT629 where improved machining characteristics are needed. | |
| Fillers | Paper | |
| Other | 1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use 2.The mechanical properties are converted from American unit system to International unit system. | |
| Supplier Disclaimer | This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values". To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest. It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available. | |