Phenolic NP602 - Sheet

Alternative und Handelsbezeichungen
U.L. LISTED: N
Want to keep this datasheet? Save it now in your required format

Description

A paper-base laminate with low phenolic resin content for hard, flat surfaces. It is typically hot punched for numerous low voltage electrical applications of less than 250 volts where the material is not subjected to high humidity.

Diese Materialdaten wurden von Norplex Micarta zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

Eigenschaften

Allgemein

PropertyValueTesting StandardComment

Dichte

1.3 g/cm³

Show Supplier Material materials with Dichte of 1.3 g/cm³

ASTM D792

Moisture absorption

8 %

Show Supplier Material materials with Moisture absorption of 8 %

ASTM D570

Condition D₁-24/23

Mechanisch

PropertyValueTesting StandardComment

Biegefestigkeit

151.7 MPa

Show Supplier Material materials with Biegefestigkeit of 151.7 MPa

ASTM D790

Condition A, Transverse

172.4 MPa

Show Supplier Material materials with Biegefestigkeit of 172.4 MPa

ASTM D790

Condition A

Druckfestigkeit

241.3 MPa

Show Supplier Material materials with Druckfestigkeit of 241.3 MPa

ASTM D695

Condition A | Flatwise

Härte, Rockwell M

90 [-]

Show Supplier Material materials with Härte, Rockwell M of 90 [-]

ASTM D785

Impact strength, Izod unnotched, ASTM

27 J/m

Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 27 J/m

ASTM D256

Condition E-48/50, Transverse

29 J/m

Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 29 J/m

ASTM D256

Condition E-48/50

Zugfestigkeit

117.2 MPa

Show Supplier Material materials with Zugfestigkeit of 117.2 MPa

ASTM D638

Condition A

Thermisch

PropertyValueComment

Relative temperature index, electrical

150 °C

Show Supplier Material materials with Relative temperature index, electrical of 150 °C

UL Bulletin 746b¹

Relative temperature index, mechanical strength

150 °C

Show Supplier Material materials with Relative temperature index, mechanical strength of 150 °C

UL Bulletin 746b¹

Entflammbarkeit

UL Bulletin 94, Class HB, Condition A

Elektrisch

PropertyValueTesting StandardComment

Durchschlagspannung

3 kV

Show Supplier Material materials with Durchschlagspannung of 3 kV

ASTM D149

Condition D48/50

60 kV

Show Supplier Material materials with Durchschlagspannung of 60 kV

ASTM D149

Condition A

Technological properties

Property
Application areas

It is used in electrical applications.

Fillers

Paper

Other

1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use

Supplier Disclaimer

This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values".


To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest.


It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.