Phenolic NP615 - Sheet

Alternative und Handelsbezeichungen
U.L. LISTED: N
Want to keep this datasheet? Save it now in your required format

Description

Room temperature punching and shearing grade up to 0.125′′ thick. NP615 is more flexible with lower mechanical properties than NP611. NP615 is produced with high resin content melamine impregnated surfaces to give the resulting laminate better arc resistance.

Diese Materialdaten wurden von Norplex Micarta zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

Eigenschaften

Allgemein

PropertyValueTesting StandardComment

Bonding strength

635 Kg

Show Supplier Material materials with Bonding strength of 635 Kg

ASTM D229

Condition A

Dichte

1.41 g/cm³

Show Supplier Material materials with Dichte of 1.41 g/cm³

ASTM D792

Moisture absorption

3 %

Show Supplier Material materials with Moisture absorption of 3 %

ASTM D570

Condition D₁-24/23

Mechanisch

PropertyValueTesting StandardComment

Biegefestigkeit

96.5 MPa

Show Supplier Material materials with Biegefestigkeit of 96.5 MPa

ASTM D790

Condition A, Transverse

137.9 MPa

Show Supplier Material materials with Biegefestigkeit of 137.9 MPa

ASTM D790

Condition A

Biegemodul

6.9 GPa

Show Supplier Material materials with Biegemodul of 6.9 GPa

ASTM D790

Condition A, Transverse

8.3 GPa

Show Supplier Material materials with Biegemodul of 8.3 GPa

ASTM D790

Condition A

Druckfestigkeit

124.1 MPa

Show Supplier Material materials with Druckfestigkeit of 124.1 MPa

ASTM D695

Condition A | Flatwise

Härte, Rockwell M

89 [-]

Show Supplier Material materials with Härte, Rockwell M of 89 [-]

ASTM D785

Impact strength, Izod unnotched, ASTM

30 J/m

Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 30 J/m

ASTM D256

Condition E-48/50, Transverse

31 J/m

Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 31 J/m

ASTM D256

Condition E-48/50

Scherfestigkeit

81.4 MPa

Show Supplier Material materials with Scherfestigkeit of 81.4 MPa

ASTM D732

Condition A, Transverse

Zugfestigkeit

86.2 MPa

Show Supplier Material materials with Zugfestigkeit of 86.2 MPa

ASTM D638

Condition A

Thermisch

PropertyValueComment

Relative temperature index, electrical

120 °C

Show Supplier Material materials with Relative temperature index, electrical of 120 °C

UL Bulletin 746b¹

Relative temperature index, mechanical strength

120 °C

Show Supplier Material materials with Relative temperature index, mechanical strength of 120 °C

UL Bulletin 746b¹

Arc resistance

110 seconds, ASTM D495, Condition A

Entflammbarkeit

UL Bulletin 94, Class HB, Condition A

Elektrisch

PropertyValueFrequencyTesting StandardComment

Dielektrizitätskonstante

6.49 [-]

Show Supplier Material materials with Dielektrizitätskonstante of 6.49 [-]

1MHz

ASTM D150

Condition D-24/23

Durchschlagfestigkeit

27.56 kV/mm

Show Supplier Material materials with Durchschlagfestigkeit of 27.56 kV/mm

ASTM D149

Condition A

Durchschlagspannung

10 kV

Show Supplier Material materials with Durchschlagspannung of 10 kV

ASTM D149

Condition D48/50

55 kV

Show Supplier Material materials with Durchschlagspannung of 55 kV

ASTM D149

Condition A

Verlustfaktor

0.096 [-]

Show Supplier Material materials with Verlustfaktor of 0.096 [-]

1MHz

ASTM D150

Condition D-24/23

Technological properties

Property
Application areas

Intended for applications where electrical and moisture requirements are secondary.

Fillers

Paper

Other

1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use

Supplier Disclaimer

This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values".


To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest.


It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.