Eigenschaften
Allgemein
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Dichte | 1.43 g/cm³ Show Supplier Material materials with Dichte of 1.43 g/cm³ | ASTM D792 | |
Moisture absorption | 2.62 % Show Supplier Material materials with Moisture absorption of 2.62 % | ASTM D570 | Condition D₁-24/23 |
Mechanisch
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Biegefestigkeit | 80.7 MPa Show Supplier Material materials with Biegefestigkeit of 80.7 MPa | ASTM D790 | Condition E-1/150: T-150, Transverse |
97.2 MPa Show Supplier Material materials with Biegefestigkeit of 97.2 MPa | ASTM D790 | Condition A, Transverse | |
169.6 MPa Show Supplier Material materials with Biegefestigkeit of 169.6 MPa | ASTM D790 | Condition E-1/150: T-150 | |
211.7 MPa Show Supplier Material materials with Biegefestigkeit of 211.7 MPa | ASTM D790 | Condition A | |
Biegemodul | 11.7 GPa Show Supplier Material materials with Biegemodul of 11.7 GPa | ASTM D790 | Condition A, Transverse |
12.4 GPa Show Supplier Material materials with Biegemodul of 12.4 GPa | ASTM D790 | Condition A | |
Druckfestigkeit | 252.3 MPa Show Supplier Material materials with Druckfestigkeit of 252.3 MPa | ASTM D695 | Condition A | Flatwise |
Härte, Rockwell M | 85 [-] Show Supplier Material materials with Härte, Rockwell M of 85 [-] | ASTM D785 | |
Impact strength, Izod unnotched, ASTM | 240 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 240 J/m | ASTM D256 | Condition A, Transverse |
267 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 267 J/m | ASTM D256 | Condition A | |
Zugfestigkeit | 148.9 MPa Show Supplier Material materials with Zugfestigkeit of 148.9 MPa | ASTM D638 | Condition A |
Thermisch
| Property | Value | Comment | |
|---|---|---|---|
Relative temperature index, mechanical strength | 165 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 165 °C | UL Bulletin 746b¹ | |
Entflammbarkeit | UL Bulletin 94, Class HB, Condition A | ||
Technological properties
| Property | ||
|---|---|---|
| Application areas | Applications include wear plates for conveyor systems, valve plates, and compressor and pump vanes. Variations of this material may be developed for specific applications. | |
| Fillers | Aramid Fiber | |
| Other | 1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use | |
| Supplier Disclaimer | This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values". To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest. It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available. | |