Akestra™ 100

Want to keep this datasheet? Save it now in your required format

Description

Akestra™ 100 is an amorphous copolyester with sparkling glass-like clarity suitable for food packaging containers, sheets and films as well as in durables. It has outstanding features in heat resistance, chemical resistance and hydrolytic stability. Akestra™ has excellent processing properties, is easy to process in standard PET equipment and can be used in most polymer processes like extrusion casting and coating, injection molding. The high melt strength also enables good processability in film blowing and blow molding.

Akestra™ 100 is compatible with PET and can be coextruded with PET and used in thermoforming of cups for hotfill as a sustainable replacement for PS. Akestra™ may be used in food contact application and complies both with FDA and EU regulations for direct food contact.

Diese Materialdaten wurden von Perstorp zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	20.0 °C	1.27 g/cm³ Show Supplier Material materials with Dichte of 1.27 g/cm³	ASTM D 792

Mechanisch

Property	Temperature	Value	Comment
Biegemodul	20.0 °C	2.5 GPa Show Supplier Material materials with Biegemodul of 2.5 GPa	ASTM D790
Dehnung	20.0 °C	200 % Show Supplier Material materials with Dehnung of 200 %	ASTM D638
Flexural yield strength	20.0 °C	90 MPa Show Supplier Material materials with Flexural yield strength of 90 MPa	ASTM D790
Impact strength, Izod notched, ASTM	20.0 °C	25 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 25 J/m	ASTM D256

Thermisch

Property	Value	Comment
Glasübergangstemperatur	100 °C Show Supplier Material materials with Glasübergangstemperatur of 100 °C	ASTM D7426
Heat deflection temperature, 0.45 MPa	86 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 86 °C	ASTM D648

Optisch

Property	Value	Comment
Lichttransmission	90 [-] Show Supplier Material materials with Lichttransmission of 90 [-]	ASTM D1003
Opazität	1 % Show Supplier Material materials with Opazität of 1 %	ASTM D1003

Technological properties

Property

Application areas

Food packaging containers, blow molding, sheets and films as well as in durables injection molding articles.

Compliance

Akestra™ and/or its monomers are approved as food contact material in Europe (EFSA) and USA (FDA). Akestra™ complies with RoHS. All raw materials are REACH registered. A document of compliance is available on request with details about its regulatory and compliances.

Processing methods

Desiccant dryer and/or vented extrusion equipment.

Drying Time: 8-10 hours

Max. Drying Temp.: 80 ˚C

Dew point: < -29 ˚C

Processing melt temp. 220-270˚C

Mold Temperature. 20-60˚C

More information are available on request, TI-1800 and TI-1801

Akestra™ 100

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften