LNP™ THERMOCOMP™ Compound WF006H

Want to keep this datasheet? Save it now in your required format

Description

LNP THERMOCOMP WF006H is a compound based on PBT resin containing 30% Glass Fiber. Added feature of this grade is: Healthcare.

Diese Materialdaten wurden von Sabic zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Eigenschaften

Allgemein

PropertyTemperatureValueComment

Dichte

23.0 °C

1.62 g/cm³

Show Supplier Material materials with Dichte of 1.62 g/cm³

ASTM D 792

Mechanisch

PropertyTemperatureValueComment

Biegefestigkeit

23.0 °C

186 MPa

Show Supplier Material materials with Biegefestigkeit of 186 MPa

ASTM D 790

Biegemodul

23.0 °C

9.4 GPa

Show Supplier Material materials with Biegemodul of 9.4 GPa

ASTM D 790

Dehnung

23.0 °C

2.7 %

Show Supplier Material materials with Dehnung of 2.7 %

ASTM D 638 | break

Elastizitätsmodul

23.0 °C

10.4 GPa

Show Supplier Material materials with Elastizitätsmodul of 10.4 GPa

ASTM D 638 | 50 mm/min

Impact strength, Izod notched, ASTM

23.0 °C

69 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 69 J/m

ASTM D 256 | notched, 23°C

Impact strength, Izod unnotched, ASTM

23.0 °C

713 J/m

Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 713 J/m

ASTM D 4812 | 23°C

Schlagzähigkeit, Izod gekerbt

23.0 °C

69 kJ/m²

Show Supplier Material materials with Schlagzähigkeit, Izod gekerbt of 69 kJ/m²

ASTM D 256 | notched, 23°C

Zugfestigkeit

23.0 °C

119 MPa

Show Supplier Material materials with Zugfestigkeit of 119 MPa

ASTM D 638 | break

Thermisch

PropertyValueComment

Heat deflection temperature, 1.80 MPa

208 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 208 °C

ASTM D 648 | 3.2mm, unannealed

Wärmeformbeständigkeitstemperatur

208 °C

Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 208 °C

Rheological Properties

PropertyTemperatureValueComment

Schrumpfung

23.0 °C

0.6 %

Show Supplier Material materials with Schrumpfung of 0.6 %

ASTM D 955 | 24 hrs

Technological properties

Property
Application areas

Pharmaceutical Packaging & Drug Delivery

Availability

Europe,Asia,Americas

Processing methods

Drying Temperature: 120°C
Drying Time: 4hrs
Maximum Moisture Content: 0.05%
Melt Temperature: 240 to 265.0°C
Front - Zone 3 Temperature: 260 to 270.0°C
Middle - Zone 2 Temperature: 245 to 255.0°C
Rear - Zone 1 Temperature: 220 to 230.0°C
Mold Temperature: 80 to 100.0°C
Back Pressure: 0.2 to 0.3MPa
Screw Speed: 30 to 60.0rpm

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.