Eigenschaften
Allgemein
| Property | Temperature | Value | Comment |
|---|---|---|---|
Dichte | 23.0 °C | 1.51 g/cm³ Show Supplier Material materials with Dichte of 1.51 g/cm³ | ISO 1183 |
Wasserabsorption | 23.0 °C | 0.04 % Show Supplier Material materials with Wasserabsorption of 0.04 % | ISO 62 |
Mechanisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Biegefestigkeit | 23.0 °C | 270 MPa Show Supplier Material materials with Biegefestigkeit of 270 MPa | ISO 178 |
Biegemodul | 23.0 °C | 11.3 GPa Show Supplier Material materials with Biegemodul of 11.3 GPa | ISO 178 |
Dehnung | 23.0 °C | 2.7 % Show Supplier Material materials with Dehnung of 2.7 % | ISO 527 |
Schlagfestigkeit, Charpy gekerbt | 23.0 °C | 10 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 10 kJ/m² | ISO 179 |
Zugfestigkeit | 23.0 °C | 180 MPa Show Supplier Material materials with Zugfestigkeit of 180 MPa | ISO 527 |
Thermisch
| Property | Temperature | Value | Comment | ||
|---|---|---|---|---|---|
Heat deflection temperature, 1.80 MPa | 330 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 330 °C | ISO 75 | |||
Schmelzpunkt | 343 °C Show Supplier Material materials with Schmelzpunkt of 343 °C | ISO 11357 (10°C/min) | |||
Wärmeleitfähigkeit | 23.0 °C | 0.3 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 0.3 W/(m·K) | ISO 22007-4 | ||
Entflammbarkeit | V-0, UL-94 | ||||
Elektrisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Dielektrizitätskonstante | 23.0 °C | 3.2 [-] Show Supplier Material materials with Dielektrizitätskonstante of 3.2 [-] | IEC 60250 |
Durchschlagfestigkeit | 23.0 °C | 25 kV/mm Show Supplier Material materials with Durchschlagfestigkeit of 25 kV/mm | IEC 60243 |
Kriechstromfestigkeit | 23.0 °C | 150 V Show Supplier Material materials with Kriechstromfestigkeit of 150 V | IEC 60112 |
Verlustfaktor | 23.0 °C | 5E-3 [-] Show Supplier Material materials with Verlustfaktor of 5E-3 [-] | IEC 60250 |
Volume resistivity | 23.0 °C | 1.00E+16 Ω·cm Show Supplier Material materials with Volume resistivity of 1.00E+16 Ω·cm | IEC 60093 |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Chemical pump pump body and impeller, cable plug, junction box, ultra pure water system pipe fittings and valves.Engine bearing, shim, sealing element, clutch ring.The driving and brake parts of a car. Cable, wire, coil skeleton, connector, etc | |
| Fillers | 30% Glass Fiber | |
| Processing methods | Extrusion or Injection Moulding / Test Specimen Production: Drying 150°C & 3 hours/120°C & 5 hours - Injection molding melt temperature: 360-385°C - Injection molding mold temperature: 180-200°C | |