Graphite DLE

Nombres alternativos y comerciales
DLE
Want to keep this datasheet? Save it now in your required format

Description

Densified prior to graphitization, GRAFSTARTM DLE material is good for general applications requiring a cost effective solution.

Los datos sobre este material han sido proporcionados por Advanced Graphite Materials.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValue

Densidad

23.0 °C

1.67 g/cm³

Show Supplier Material materials with Densidad of 1.67 g/cm³

Porosidad

60 %

Show Supplier Material materials with Porosidad of 60 %

Rango de tamaño de partículas

0.79 µm

Show Supplier Material materials with Rango de tamaño de partículas of 0.79 µm

Tamaño de partícula

max.

Mecánica

PropertyTemperatureValue

Hardness, Rockwell R

23.0 °C

60 [-]

Show Supplier Material materials with Hardness, Rockwell R of 60 [-]

Módulo elástico

23.0 °C

12 GPa

Show Supplier Material materials with Módulo elástico of 12 GPa

Módulo elástico transversal

23.0 °C

7 GPa

Show Supplier Material materials with Módulo elástico transversal of 7 GPa

Resistencia a la compresión

23.0 °C

38.6 MPa

Show Supplier Material materials with Resistencia a la compresión of 38.6 MPa

Resistencia a la flexión

23.0 °C

20 MPa

Show Supplier Material materials with Resistencia a la flexión of 20 MPa

Resistencia a la flexión transversal

23.0 °C

12 MPa

Show Supplier Material materials with Resistencia a la flexión transversal of 12 MPa

Resistencia a la tracción

23.0 °C

14 MPa

Show Supplier Material materials with Resistencia a la tracción of 14 MPa

Resistencia a la tracción transversal

23.0 °C

8.3 MPa

Show Supplier Material materials with Resistencia a la tracción transversal of 8.3 MPa

Aplicaciones térmicas

PropertyTemperatureValueComment

Coeficiente de dilatación térmica

23.0 °C

1.2E-6 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica of 1.2E-6 1/K

average for 20-100°C

Coeficiente de dilatación térmica transversal

23.0 °C

2.8E-6 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 2.8E-6 1/K

average for 20-100°C

Contenido de cenizas

23.0 °C

0.15 %

Show Supplier Material materials with Contenido de cenizas of 0.15 %

Thermal conductivity, in-plane

23.0 °C

160 W/(m·K)

Show Supplier Material materials with Thermal conductivity, in-plane of 160 W/(m·K)

Thermal conductivity, through-plane

23.0 °C

115 W/(m·K)

Show Supplier Material materials with Thermal conductivity, through-plane of 115 W/(m·K)

Technological properties

Property
Application areas

Heater Rods, Heating Elements, Contacts and Holders