1070A H24 Non-Heat Treatable Al Wrought Alloy

Want to keep this datasheet? Save it now in your required format

Description

Excellent surface finishing properties (bright, anodizing ...) and corrosion resistance.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por Aludium.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValue

Densidad

23.0 °C

2.69 g/cm³

Show Supplier Material materials with Densidad of 2.69 g/cm³

Medidas

PropertyValue

Espesor

0.2 - 3 mm

Show Supplier Material materials with Espesor of 0.2 - 3 mm

Mecánica

PropertyTemperatureValueComment

Dureza Brinell (HBW)

23.0 °C

31 - 35 [-]

Show Supplier Material materials with Dureza Brinell (HBW) of 31 - 35 [-]

according to EN 485-2

Elongación A50

23.0 °C

3 %

Show Supplier Material materials with Elongación A50 of 3 %

according to EN 485-2

Límite elástico

23.0 °C

60 - 80 MPa

Show Supplier Material materials with Límite elástico of 60 - 80 MPa

according to EN 485-2

Módulo de cizallamiento

23.0 °C

26.5 GPa

Show Supplier Material materials with Módulo de cizallamiento of 26.5 GPa

Módulo elástico

23.0 °C

70 GPa

Show Supplier Material materials with Módulo elástico of 70 GPa

Resistencia a la tracción

23.0 °C

100 - 150 MPa

Show Supplier Material materials with Resistencia a la tracción of 100 - 150 MPa

according to EN 485-2

Ángulo de flexión a 90°

23.0 °C

1 °/t

Show Supplier Material materials with Ángulo de flexión a 90° of 1 °/t

according to EN 485-2

Aplicaciones térmicas

PropertyTemperatureValueComment

Coeficiente de dilatación térmica

100.0 °C

2.4E-5 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica of 2.4E-5 1/K

20-100°C

Conductividad térmica

23.0 °C

138 W/(m·K)

Show Supplier Material materials with Conductividad térmica of 138 W/(m·K)

Eléctrico

PropertyTemperatureValue

Resistividad eléctrica

23.0 °C

4.9E-8 Ω·m

Show Supplier Material materials with Resistividad eléctrica of 4.9E-8 Ω·m

Chemical properties

PropertyValueComment

Cobre

0.03 %

Show Supplier Material materials with Cobre of 0.03 %

Hierro

0.25 %

Show Supplier Material materials with Hierro of 0.25 %

Magnesio

0.03 %

Show Supplier Material materials with Magnesio of 0.03 %

Manganeso

0.03 %

Show Supplier Material materials with Manganeso of 0.03 %

Otro

0.03 %

Show Supplier Material materials with Otro of 0.03 %

Min.

Silicona

0.2 %

Show Supplier Material materials with Silicona of 0.2 %

Titanio

0.03 %

Show Supplier Material materials with Titanio of 0.03 %

Zinc

0.07 %

Show Supplier Material materials with Zinc of 0.07 %

Technological properties

Property
Anodizing

Excellent

Application areas

Facades: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Roofing: Single sheet, Sheets for composites/ sandwich Panels, Foil for bituminous coating; Doors: Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Sun Protection Systems: Single sheet (covering, sun breakers and gutters); Interiors and ceilings: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels, Decoration; Furniture, Plinths, Blinds: Single sheet, Intermediate transformation/interior use; Lighting: Anodizing Quality, Lacquering quality; Electronic devices: Housing of devices; Tubes: Industrial tubes, Flexible tube, Pipes; Insulation; Solar: Solar collectors, Photovoltaic panels; Wind energy: Nacelle coverings, Rotor, Hub, Stairs; Cosmetics: Cosmetic pieces; Automotive trim: Interior trim, Windows frame, Marque badges

Corrosion properties

Excellent

Welding

Excellent

Workability

Excellent