3004 O Non-Heat Treatable Al Wrought Alloy

Want to keep this datasheet? Save it now in your required format

Description

Stronger than 1200, 3003 and 3103 for similar applications. Good for chemical and food contact applications.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por Aludium.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValue

Densidad

23.0 °C

2.72 g/cm³

Show Supplier Material materials with Densidad of 2.72 g/cm³

Medidas

PropertyValue

Espesor

0.2 - 2 mm

Show Supplier Material materials with Espesor of 0.2 - 2 mm

Mecánica

PropertyTemperatureValue

Dureza Brinell (HBW)

23.0 °C

45 - 80 [-]

Show Supplier Material materials with Dureza Brinell (HBW) of 45 - 80 [-]

Elongación A50

23.0 °C

1 %

Show Supplier Material materials with Elongación A50 of 1 %

Límite elástico

23.0 °C

60 - 310 MPa

Show Supplier Material materials with Límite elástico of 60 - 310 MPa

Módulo de cizallamiento

23.0 °C

26 GPa

Show Supplier Material materials with Módulo de cizallamiento of 26 GPa

Módulo elástico

23.0 °C

68.6 GPa

Show Supplier Material materials with Módulo elástico of 68.6 GPa

Resistencia a la tracción

23.0 °C

155 - 330 MPa

Show Supplier Material materials with Resistencia a la tracción of 155 - 330 MPa

Ángulo de flexión a 180°

23.0 °C

0 °/t

Show Supplier Material materials with Ángulo de flexión a 180° of 0 °/t

Aplicaciones térmicas

PropertyTemperatureValueComment

Coeficiente de dilatación térmica

100.0 °C

2.4E-5 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica of 2.4E-5 1/K

20-100°C

Conductividad térmica

23.0 °C

163 W/(m·K)

Show Supplier Material materials with Conductividad térmica of 163 W/(m·K)

Eléctrico

PropertyTemperatureValue

Resistividad eléctrica

23.0 °C

4.1E-8 Ω·m

Show Supplier Material materials with Resistividad eléctrica of 4.1E-8 Ω·m

Chemical properties

PropertyValue

Cobre

0.25 %

Show Supplier Material materials with Cobre of 0.25 %

Hierro

0.7 %

Show Supplier Material materials with Hierro of 0.7 %

Magnesio

0.8 - 1.3 %

Show Supplier Material materials with Magnesio of 0.8 - 1.3 %

Manganeso

1 - 1.5 %

Show Supplier Material materials with Manganeso of 1 - 1.5 %

Silicona

0.3 %

Show Supplier Material materials with Silicona of 0.3 %

Zinc

0.25 %

Show Supplier Material materials with Zinc of 0.25 %

Technological properties

Property
Anodizing

Good (For surface protection only)

Application areas

Facades: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Roofing: Single sheet, Sheets for composites/ sandwich Panels, Foil for bituminous coating; Doors: Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Sun Protection Systems: Single sheet (covering, sun breakers and gutters); Interiors and ceilings: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Furniture, Plinths, Blinds: Intermediate transformation/interior use; Heat exchangers: Fins; Wind energy: Nacelle coverings, Rotor, Hub, Stairs; Food can: Body, Lids; Semi-rigid and corrugated: Smooth wall

Brazing

Very Good

Corrosion properties

Good

Welding

Very Good

Workability

Good