DD12 AM FCE

Want to keep this datasheet? Save it now in your required format

Description

DD12 AM FCE for cold forming and deep drawing applications are characterised by guaranteed maximum yield and tensile strength and minimum elongation.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por ArcelorMittal.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Value	Comment
Carbon equivalent (CEV)	0.18 [-] Show Supplier Material materials with Carbon equivalent (CEV) of 0.18 [-]	max.

Medidas

Property	Value
Dimensions	Please feel free to check the figure on the right side of the material page for more details.

Mecánica

Property	Value	Comment
Elongación	25 % Show Supplier Material materials with Elongación of 25 %	min. \| for thickness 1.5-2 mm \| Transverse, A80
	26 % Show Supplier Material materials with Elongación of 26 %	min. \| for thickness 2-3 mm \| Transverse, A80
	30 % Show Supplier Material materials with Elongación of 30 %	min. A5.65√So \| for thickness 3-15 mm \| Transverse
Límite elástico	200 - 340 MPa Show Supplier Material materials with Límite elástico of 200 - 340 MPa	for thickness 1.5-2 mm \| Transverse
	200 - 320 MPa Show Supplier Material materials with Límite elástico of 200 - 320 MPa	for thickness 2-15 mm \| Transverse
Resistencia a la tracción	290 - 420 MPa Show Supplier Material materials with Resistencia a la tracción of 290 - 420 MPa	for thickness 1.5-15 mm \| Transverse

Chemical properties

Property	Value	Comment
Aluminio	0.02 % Show Supplier Material materials with Aluminio of 0.02 %	max.
Azufre	0.03 % Show Supplier Material materials with Azufre of 0.03 %	max.
Carbono	0.02 - 0.1 % Show Supplier Material materials with Carbono of 0.02 - 0.1 %
Fósforo	0.03 % Show Supplier Material materials with Fósforo of 0.03 %	max.
Manganeso	0.45 % Show Supplier Material materials with Manganeso of 0.45 %	max.
Silicona	0.03 % Show Supplier Material materials with Silicona of 0.03 %	max.

Technological properties

Property
Application areas	This is widely used for bending and drawing applications in general industry, building, the automotive industry and related sectors (e.g. oil sumps for industrial vehicles etc). ArcelorMittal's steels for cold forming and deep drawing applications display good or even excellent performance in all types of deep drawing processes, enabling the production of complex parts. Uncoated hot rolled steels for bending and deep drawing applications are suitable under certain conditions for food contact, as specified in the Regulation (EC) No. 1935/2004 and French standard NF A 36-714. Please contact us for further information on this subject.
Coating	Galvanisation: Class 1
Other	ArcelorMittal provides guarantees for thicknesses greater than 11 mm.
Welding	The weldability (spot and arc welding) of ArcelorMittal's hot rolled steels for cold forming and deep drawing is equivalent to that of cold rolled steels of corresponding grades.