S200D AM FCE

Want to keep this datasheet? Save it now in your required format

Description

S200D AM FCE is structural forming grade offering superior strength compared with standard deep drawing grades. Furthermore, its mechanical properties meet very narrow tolerance limits.

Related Standards

EN 10111

Equivalent Materials

EN DD14

Los datos sobre este material han sido proporcionados por ArcelorMittal.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Value	Comment
Carbon equivalent (CEV)	0.15 [-] Show Supplier Material materials with Carbon equivalent (CEV) of 0.15 [-]	max.

Medidas

Property	Value
Dimensions	Please feel free to check the figure on the right side of the material page for more details.

Mecánica

Property	Value	Comment
Elongación	32 % Show Supplier Material materials with Elongación of 32 %	min. \| for thickness 1.8-2 mm \| Transverse, A80
	32 % Show Supplier Material materials with Elongación of 32 %	min. \| for thickness 2-3 mm \| Transverse, A80
	37 % Show Supplier Material materials with Elongación of 37 %	min. A5.65√So \| for thickness 3-13 mm
Límite elástico	200 - 310 MPa Show Supplier Material materials with Límite elástico of 200 - 310 MPa	for thickness 1.8-2 mm \| Transverse
	200 - 290 MPa Show Supplier Material materials with Límite elástico of 200 - 290 MPa	for thickness 2-6 mm \| Transverse
Resistencia a la tracción	300 - 380 MPa Show Supplier Material materials with Resistencia a la tracción of 300 - 380 MPa	for thickness 1.8-13 mm \| Transverse

Chemical properties

Property	Value	Comment
Aluminio	0.02 % Show Supplier Material materials with Aluminio of 0.02 %	min.
Azufre	0.02 % Show Supplier Material materials with Azufre of 0.02 %	max.
Boro	0.002 - 0.005 % Show Supplier Material materials with Boro of 0.002 - 0.005 %
Carbono	0.02 - 0.08 % Show Supplier Material materials with Carbono of 0.02 - 0.08 %
Fósforo	0.025 % Show Supplier Material materials with Fósforo of 0.025 %	max.
Manganeso	0.35 % Show Supplier Material materials with Manganeso of 0.35 %	max.
Silicona	0.03 % Show Supplier Material materials with Silicona of 0.03 %	max.

Technological properties

Property

Application areas

Structural forming grade which is well suited to applications requiring high reproducibility of processing performance (especially control of springback). That is why the S200D AM FCE grade is especially suitable for applications such as compressor casings.

Chemical composition

The chemical properties given are based on cast analysis data.

Coating

Galvanisation: Class 1