S240D AM FCE

Want to keep this datasheet? Save it now in your required format

Description

S240D AM FCE is structural forming grade offering superior strength compared with standard deep drawing grades. Furthermore, its mechanical properties meet very narrow tolerance limits.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por ArcelorMittal.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Value	Comment
Carbon equivalent (CEV)	0.18 [-] Show Supplier Material materials with Carbon equivalent (CEV) of 0.18 [-]	max.

Medidas

Property	Value
Dimensions	Please feel free to check the figure on the right side of the material page for more details.

Mecánica

Property	Temperature	Value	Comment
Elongación		23 % Show Supplier Material materials with Elongación of 23 %	min. \| for thickness 1.5-2 mm \| Transverse, A80
		24 % Show Supplier Material materials with Elongación of 24 %	min. \| for thickness 2-3 mm \| Transverse, A80
		28 % Show Supplier Material materials with Elongación of 28 %	min. A5.65√So \| for thickness 3-20 mm
Energía de impacto Charpy	20 °C	27 J Show Supplier Material materials with Energía de impacto Charpy of 27 J	min. \| for thickness 1.5-20 mm
Límite elástico		240 - 360 MPa Show Supplier Material materials with Límite elástico of 240 - 360 MPa	for thickness 1.5-2 mm \| Transverse
		240 - 340 MPa Show Supplier Material materials with Límite elástico of 240 - 340 MPa	for thickness 2-20 mm \| Transverse
Resistencia a la tracción		360 - 430 MPa Show Supplier Material materials with Resistencia a la tracción of 360 - 430 MPa	for thickness 1.5-20 mm \| Transverse

Chemical properties

Property	Value	Comment
Aluminio	0.01 % Show Supplier Material materials with Aluminio of 0.01 %	min.
Azufre	0.03 % Show Supplier Material materials with Azufre of 0.03 %	max.
Carbono	0.02 - 0.12 % Show Supplier Material materials with Carbono of 0.02 - 0.12 %
Fósforo	0.03 % Show Supplier Material materials with Fósforo of 0.03 %	max.
Manganeso	0.6 % Show Supplier Material materials with Manganeso of 0.6 %	max.
Silicona	0.03 % Show Supplier Material materials with Silicona of 0.03 %	max.

Technological properties

Property

Application areas

Structural forming grade which is well suited to applications requiring high reproducibility of processing performance (especially control of springback). The S240D AM FCE grade is popular with Steel Service Centres, since it allows them to rationalise their supplies of deep drawable and structural steel. This grade is a versatile material for numerous applications in industry markets.

Chemical composition

The chemical properties given are based on cast analysis data.

Coating

Galvanisation: Class 1