Easy Punch

Nombres alternativos y comerciales
Usidécoupe

Want to keep this datasheet? Save it now in your required format

Description

The Easy Punch grade has guaranteed mechanical properties and roughness. Magnetic properties are not guaranteed, as they are not optimised in this product. Should the application require enhanced magnetic performance, other electrical steel grades in our product range are recommended. This Easy Punch grade has excellent punchability and stackability, thanks to appropriate mechanical properties and roughness. It is therefore eminently suitable for automatic stacking and assembling techniques. The excellent punchability is achieved by means of a final skin-pass treatment, which produces high Re/Rm values (over 0.9). Easy Punch also has excellent weldability.

Los datos sobre este material han sido proporcionados por ArcelorMittal.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

Mecánica

Property	Value	Comment
Dureza Vickers	115 - 125 [-] Show Supplier Material materials with Dureza Vickers of 115 - 125 [-]
Elongación	23 - 35 % Show Supplier Material materials with Elongación of 23 - 35 %	Typical values \| Transverse \| A80
Límite elástico	270 - 370 MPa Show Supplier Material materials with Límite elástico of 270 - 370 MPa	min. \| Guaranteed \| Transverse
	290 - 370 MPa Show Supplier Material materials with Límite elástico of 290 - 370 MPa	Typical values \| Transverse
Resistencia a la tracción	270 - 370 MPa Show Supplier Material materials with Resistencia a la tracción of 270 - 370 MPa	Typical values \| Transverse
	310 - 380 MPa Show Supplier Material materials with Resistencia a la tracción of 310 - 380 MPa	min. \| Guaranteed \| Transverse
Yield to strength ratio	0.85 [-] Show Supplier Material materials with Yield to strength ratio of 0.85 [-]	min. \| Guaranteed
	0.9 [-] Show Supplier Material materials with Yield to strength ratio of 0.9 [-]	min. \| Typical values

Technological properties

Property

Application areas

The Easy Punch grade is designed for small machines for intermittent use:

Automotive equipment such as alternators, windscreen wipers, window-opening motors

Small domestic appliances such as coffee grinders, mixers

Small hand tools such as drills

Coating

This Easy Punch grade is available non-insulated. Corrosion protection can be enhanced by applying a light oiling treatment.

Other

Usually, the client does not perform heat treatment after punching. Heat treatment is an option to increase the magnetic performance of Easy Punch.

Dimensions:

The Easy Punch grade is available in thicknesses ranging from 0.5 to 1.2 mm. For thicknesses less than 0.7 mm, the width may not exceed 1400 mm.

	Side trimmed
	Min width	Max width
Easy Punch	600	1500

Easy Punch

Description

Ashby charts

Materiales de este proveedor

Propiedades