EN 10346 Grade HX380LAD hit dip zinc coated (+Z)

Nombres alternativos y comerciales
MA 360L,Profilar® 380,E360D+Z,Soldur® 380
Want to keep this datasheet? Save it now in your required format

Description

ArcelorMittal's hot dip galvanised steel consists of a steel substrate with a metallic zinc coating applied by means of a continuous hot dip galvanising process. Metallic zinc coatings are available in steel grades ranging from steel for bending and deep drawing applications, to structural steels and high yield strength steels.

A glossy surface finish obtained under specific skin-pass conditions (either non-skin-passed or skin-passed with smooth cylinders to obtain low roughness) can be provided if required at time of enquiry.

This Hot dip galvanised product offer excellent corrosion resistance combined with very good forming properties. The coating process can apply very thick zinc layers, up to 725 g/m² (total of both sides).

Related Standards

Los datos sobre este material han sido proporcionados por ArcelorMittal.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

Medidas

PropertyValue

Dimensions

Please feel free to check the figure on the right side of the material page for more details.

Mecánica

PropertyValueComment

Elongación

15 %

Show Supplier Material materials with Elongación of 15 %

min. | for thickness 0.3-0.5 mm | Transverse | A80

17 %

Show Supplier Material materials with Elongación of 17 %

min. | for thickness 0.5-0.7 mm | Transverse | A80

19 %

Show Supplier Material materials with Elongación of 19 %

min. | for thickness 0.7-6 mm | Transverse | A80

Límite elástico

380 - 480 MPa

Show Supplier Material materials with Límite elástico of 380 - 480 MPa

for thickness 0.3-6 mm | Transverse

Resistencia a la tracción

440 - 560 MPa

Show Supplier Material materials with Resistencia a la tracción of 440 - 560 MPa

for thickness 0.3-6 mm | Transverse

Chemical properties

PropertyValueComment

Aluminio

0.015 %

Show Supplier Material materials with Aluminio of 0.015 %

min.

Azufre

0.025 %

Show Supplier Material materials with Azufre of 0.025 %

max.

Carbono

0.12 %

Show Supplier Material materials with Carbono of 0.12 %

max.

Fósforo

0.03 %

Show Supplier Material materials with Fósforo of 0.03 %

max.

Manganeso

1.5 %

Show Supplier Material materials with Manganeso of 1.5 %

max.

Niobio

0.1 %

Show Supplier Material materials with Niobio of 0.1 %

max.

Silicona

0.5 %

Show Supplier Material materials with Silicona of 0.5 %

max.

Titanio

0.15 %

Show Supplier Material materials with Titanio of 0.15 %

max.

Technological properties

Property
Application areas

ArcelorMittal's hot dip galvanised steels can be used in a very wide range of applications for industrial markets, both indoors and outdoors. Some of the most common applications are:

  • Building: wide sections for roofing and cladding, doors, door frames, metallic ceilings, partitions, structural members etc
  • Domestic appliances: all appliances for this sector (both white and brown goods) are manufactured with hot dip galvanised steels
  • Miscellaneous: electrical cabinets, aeraulic components, air conditioners, road signs etc

    Zinc hot dip galvanised steel is suitable for contact with foodstuffs under certain conditions, as specified in the Regulation (EC) No. 1935/2004 and French standard NF A 36-712-1. Please contact us for further information on this subject.

  • Coating

    Designation EN 10346Coating weight - double sided (g/m²)Coating thickness (µm per side)
    Z1001007.0
    Z14014010.0
    Z20020014.0
    Z22522516.0
    Z27527520.0
    Z35035025.0
    Z45045031.0
    Z60060042.0
    Not included in the standard
    Z80805.5
    Z72572551.0
    For other coating weights, please contact us.

    Other

    Storage

    Galvanised strip are usually supplied passivated or oiled to temporarily limit any risk of white rust formation. During transport and storage, all necessary precautions must be taken to keep the material dry and to prevent the formation of condensation. Improved protection can be achieved by the application of an Easyfilm® thin organic coating (please see data sheet E80 for the specific properties of Easyfilm®).


    Forming and joining

    The forming and joining techniques currently used for uncoated steel are also suitable for galvanised steel. It is essential to select a coating thickness that is compatible with the forming and joining processes envisaged, without compromising the desired degree of corrosion protection.


    Painting

    Hot dip galvanised steel can be painted after degreasing and surface treatment when supplied oiled. If an Easyfilm® thin organic coating has been applied, they can be painted directly, without any prior surface treatment. However, the paint must be compatible with the Easyfilm® resin.

    Welding

    In electrical resistance welding, the welding current must be suitably regulated and regularly adjusted. Electrode life can be extended by regularly stepping up the welding current and periodically dressing (machining) the electrodes.