General
Property | Temperature | Value | Comment |
---|---|---|---|
Densidad | 23.0 °C | 1.13 g/cm³ Show Supplier Material materials with Densidad of 1.13 g/cm³ | ISO 1183 |
Water content | 23.0 °C | 0.1 % Show Supplier Material materials with Water content of 0.1 % | ISO 15512 |
Mecánica
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Elongación | 23.0 °C | 15 % Show Supplier Material materials with Elongación of 15 % | ISO 527-2 (5mm/min) | ||
Módulo de flexión | 23.0 °C | 2.8 GPa Show Supplier Material materials with Módulo de flexión of 2.8 GPa | ISO 178 (2mm/min) | ||
Módulo elástico | 23.0 °C | 3.2 GPa Show Supplier Material materials with Módulo elástico of 3.2 GPa | ISO 527-2 (1mm/min) | ||
Resistencia a la flexión | 23.0 °C | 90 MPa Show Supplier Material materials with Resistencia a la flexión of 90 MPa | ISO 178 (2mm/min) | ||
Resistencia a la tracción | 23.0 °C | 75 MPa Show Supplier Material materials with Resistencia a la tracción of 75 MPa | ISO 527-2 (5mm/min) | ||
Resistencia al choque, ensayo Charpy entallado | 23.0 °C | 7 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 7 kJ/m² | ISO 179/1eA | ||
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 7 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 7 kJ/m² | ISO 180/1A | ||
Resistencia al choque, ensayo Charpy no entallado | no break at 23°C; ISO 179/1eU | ||||
Resistencia al choque, ensayo Izod no entallado | no break at 23°C; ISO 180/1U |
Aplicaciones térmicas
Property | Value | Comment | |
---|---|---|---|
Heat deflection temperature, 0.45 MPa | 220 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 220 °C | ISO 75-2/B | |
Heat deflection temperature, 1.80 MPa | 75 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 75 °C | ISO 75-2/A | |
Temperatura de fusión | 260 °C Show Supplier Material materials with Temperatura de fusión of 260 °C | ISO 3146 | |
Ball Pressure Test | <2, for 125+/-2°C, EN 60695-10-2 | ||
Inflamabilidad | UL94 (0.8mm) V2 |
Eléctrico
Property | Temperature | Value | Comment |
---|---|---|---|
Surface resistivity | 23.0 °C | 1.00E+14 Ω/sq Show Supplier Material materials with Surface resistivity of 1.00E+14 Ω/sq | ASTM D257 |
Índice de seguimiento comparativo | 23.0 °C | 550 V Show Supplier Material materials with Índice de seguimiento comparativo of 550 V | EN 60112 |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Contracción | 23.0 °C | 1.4 % Show Supplier Material materials with Contracción of 1.4 % | ISO 294-4 (3mm) |
Contracción transversal | 23.0 °C | 1.6 % Show Supplier Material materials with Contracción transversal of 1.6 % | ISO 294-4 (3mm) |
Velocidad de flujo del volumen derretido | 120 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 120 cm³/10min | ISO 1133 (275°C/5 kg) |
Technological properties
Property | ||
---|---|---|
Application areas | Eplamid 66 offers all primary properties of unreinforced PA66 used in all sectos of industry, good balance of thermal and mechanical properties, especially for thin wall and fast cycle applications. | |
Other | Laboratory conditions are 23 ±2°C and 45-55 % RH. |