General
Property | Temperature | Value | Comment |
---|---|---|---|
Densidad | 23.0 °C | 1.28 g/cm³ Show Supplier Material materials with Densidad of 1.28 g/cm³ | ISO 1183 |
Water content | 23.0 °C | 0.1 % Show Supplier Material materials with Water content of 0.1 % | ISO 15512 |
Mecánica
Property | Temperature | Value | Comment |
---|---|---|---|
Elongación | 23.0 °C | 3 % Show Supplier Material materials with Elongación of 3 % | ISO 527-2 (5mm/min) |
Hardness, Ball Indentation | 23.0 °C | 225 MPa Show Supplier Material materials with Hardness, Ball Indentation of 225 MPa | ISO 2039-1 |
Módulo elástico | 23.0 °C | 8.1 GPa Show Supplier Material materials with Módulo elástico of 8.1 GPa | ISO 527-2 (1mm/min) |
Resistencia a la tracción | 23.0 °C | 150 MPa Show Supplier Material materials with Resistencia a la tracción of 150 MPa | ISO 527-2 (5mm/min) |
Resistencia al choque, ensayo Charpy entallado | -30.0 °C | 5 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 5 kJ/m² | ISO 179/1eA |
23.0 °C | 7 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 7 kJ/m² | ISO 179/1eA | |
Resistencia al choque, ensayo Charpy no entallado | 23.0 °C | 50 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 50 kJ/m² | ISO 179/1eU |
Aplicaciones térmicas
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Contenido de cenizas | 23.0 °C | 20 % Show Supplier Material materials with Contenido de cenizas of 20 % | ISO 3451-4 | ||
Heat deflection temperature, 1.80 MPa | 230 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 230 °C | ISO 75-2/A | |||
Heat deflection temperature, 8.0 MPa | 65 °C Show Supplier Material materials with Heat deflection temperature, 8.0 MPa of 65 °C | ISO 75-2/B | |||
Temperatura de fusión | 260 °C Show Supplier Material materials with Temperatura de fusión of 260 °C | ISO 3146 | |||
Temperatura máx. de funcionamiento, corto | 215 °C Show Supplier Material materials with Temperatura máx. de funcionamiento, corto of 215 °C | ISO 2578 | |||
Temperatura máx. de funcionamiento, largo | 110 °C Show Supplier Material materials with Temperatura máx. de funcionamiento, largo of 110 °C | ISO 2578 | |||
Inflamabilidad | UL94 (0.8mm) HB |
Eléctrico
Rheological Properties
Technological properties
Property | ||
---|---|---|
Application areas | Eplamid HT03 grades are used for molding technical parts where higher operating temperatures and higher stiffness in moist environments are required. | |
Fillers | 20% Glass Fiber | |
Other | Laboratory conditions are 23 ±2°C and 45-55 % RH. |