Propiedades
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Densidad | 23.0 °C | 1.26 g/cm³ Show Supplier Material materials with Densidad of 1.26 g/cm³ | ASTM D792 |
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Dureza Shore A | 23.0 °C | 90 [-] Show Supplier Material materials with Dureza Shore A of 90 [-] | ASTM D2240 |
Elongación | 23.0 °C | 330 % Show Supplier Material materials with Elongación of 330 % | ASTM D412 |
Resistencia a desgarros | 23.0 °C | 42 kN/m Show Supplier Material materials with Resistencia a desgarros of 42 kN/m | ASTM D624 |
Resistencia a la tracción | 23.0 °C | 15.5 MPa Show Supplier Material materials with Resistencia a la tracción of 15.5 MPa | ASTM D412 |
Set de compresión | 70.0 °C | 65 [-] Show Supplier Material materials with Set de compresión of 65 [-] | ASTM D395 |
Aplicaciones térmicas
Technological properties
| Property | ||
|---|---|---|
| Processing methods | Pre-drying: 60°C for 6-8 hr, Extrusion: Hopper Temperature: 130-140°C, Middle Temperature: 140-150°C, Measurment Temperature: 140-150°C, Front Temperature: 150-170°C, Mold Temperature: 150-170°C, Melt Temperature: 160°C, Comp. Ratio: 2.5:1, Screen: 20-60 Mesh - Injection: Rear Temperature: 130-140°C, Middle Temperature: 140-160°C, Front Temperature: 160-190°C, Nozzle Temperature: 170-190°C, Melt Temperature:170°C, Mold Temperature: 30-80°C, Speed: 100-200rpm, Back Pressure 0.05-05 Mpa | |