ToughMet® 3CX CX105

Nombres alternativos y comerciales
ToughMet® 3 CX Alloy

Want to keep this datasheet? Save it now in your required format

Description

ToughMet 3 Alloy is Materion Performance Alloys’ solution to your severe service material problems. By applying our proprietary technology process to create the EquaCast® microstructure, tailored alloying additions and spinodal hardening technology, we have engineered ToughMet 3 Alloy to provide attributes beyond those typically found in a high-strength copper alloy. ToughMet 3 Alloy in the cast and spinodally hardened (CX) condition exhibits tensile strength up to 120 ksi and hardness up to HRC 34 in a Copper - 15% Nickel - 8% Tin alloy with excellent machinability.

Exceptional resistance to corrosion and cavitation

Outstanding lubricity and durability in demanding applications

Highly uniform composition in all product forms

Available in a wide range of continuous-cast shapes and sizes

Los datos sobre este material han sido proporcionados por Materion Brush GmbH.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	23.0 °C	9 g/cm³ Show Supplier Material materials with Densidad of 9 g/cm³

Medidas

Property	Value
Diámetro exterior	28.6 - 254 mm Show Supplier Material materials with Diámetro exterior of 28.6 - 254 mm
Diámetro interior	12.7 - 76.2 mm Show Supplier Material materials with Diámetro interior of 12.7 - 76.2 mm
Wall thickness	6.35 - 15.9 mm Show Supplier Material materials with Wall thickness of 6.35 - 15.9 mm

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.3 [-] Show Supplier Material materials with Coeficiente de Poisson of 0.3 [-]
Dureza Rockwell C	23.0 °C	30 [-] Show Supplier Material materials with Dureza Rockwell C of 30 [-]
Elongación	23.0 °C	4 % Show Supplier Material materials with Elongación of 4 %
Límite elástico Rp 0,2	23.0 °C	652 - 724 MPa Show Supplier Material materials with Límite elástico Rp 0,2 of 652 - 724 MPa
Módulo elástico	23.0 °C	144 GPa Show Supplier Material materials with Módulo elástico of 144 GPa
Resistencia a la fatiga	23.0 °C	413 MPa Show Supplier Material materials with Resistencia a la fatiga of 413 MPa	10⁶ cycles R=-1
Resistencia a la tracción	23.0 °C	683 - 758 MPa Show Supplier Material materials with Resistencia a la tracción of 683 - 758 MPa

Aplicaciones térmicas

Property	Temperature	Value
Coeficiente de dilatación térmica	23.0 °C	1.6E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.6E-5 1/K
Conductividad térmica	23.0 °C	38 W/(m·K) Show Supplier Material materials with Conductividad térmica of 38 W/(m·K)

Eléctrico

Property	Value
Specific Electrical conductivity	9 % IACS Show Supplier Material materials with Specific Electrical conductivity of 9 % IACS

Magnético

Property	Temperature	Value
Permeabilidad magnética relativa	23.0 °C	1 [-] Show Supplier Material materials with Permeabilidad magnética relativa of 1 [-]

Chemical properties

Property	Value
Cobre	Balance
Estaño	8 % Show Supplier Material materials with Estaño of 8 %
Níquel	15 % Show Supplier Material materials with Níquel of 15 %

Technological properties

Property
Application areas	ToughMet 3 CX alloy is used for wear plates, bushings, sleeve bearings, linear bearings and thrust bearings in industrial, off-road, mining and heavy equipment. It is also used for oil and gas drilling hardware.

ToughMet® 3CX CX105

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades