Alloy 360 MH8 (N03360)

Nombres alternativos y comerciales
Alloy 360

Want to keep this datasheet? Save it now in your required format

Description

Materion Performance Alloys’ nickel beryllium strip Alloy 360 (UNS number N03360) combines unique mechanical and physical properties.

Properties of nickel beryllium Alloy 360 strip that a designer can use include ultimate tensile strength approaching 300,000 psi (2000 MPa), yield strength up to 245,000 psi (1690 MPa), excellent formability, stress relaxation less than 5% at 400º F (200°C), and fatigue strength (in reverse bending) of 85,000-90,000 psi (586-655 MPa) at 10 million cycles. It has corrosion resistance surpassing stainless steel. Typically, this alloy is used for mechanical and electrical / electronic components that are subjected to elevated temperatures (up to 700º F / 370°C for short times), and require good spring characteristics at these temperatures.

Los datos sobre este material han sido proporcionados por Materion Brush GmbH.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	23.0 °C	8.27 g/cm³ Show Supplier Material materials with Densidad of 8.27 g/cm³

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	9 % Show Supplier Material materials with Elongación of 9 %	min., for strip thicker than 0.10 mm
Límite elástico Rp 0,2	23.0 °C	1170 - 1410 MPa Show Supplier Material materials with Límite elástico Rp 0,2 of 1170 - 1410 MPa
Módulo elástico	23.0 °C	195 - 210 GPa Show Supplier Material materials with Módulo elástico of 195 - 210 GPa
Plegabilidad 90 ° bidireccional	23.0 °C	1.6 [-] Show Supplier Material materials with Plegabilidad 90 ° bidireccional of 1.6 [-]
Plegabilidad 90 ° en peso bruto	23.0 °C	1.2 [-] Show Supplier Material materials with Plegabilidad 90 ° en peso bruto of 1.2 [-]
Resistencia a la tracción	23.0 °C	1520 - 1690 MPa Show Supplier Material materials with Resistencia a la tracción of 1520 - 1690 MPa

Aplicaciones térmicas

Property	Temperature	Value
Coeficiente de dilatación térmica	23.0 °C	1.45E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.45E-5 1/K
Conductividad térmica	23.0 °C	48 W/(m·K) Show Supplier Material materials with Conductividad térmica of 48 W/(m·K)
Temperatura de fusión		1195 - 1325 °C Show Supplier Material materials with Temperatura de fusión of 1195 - 1325 °C

Eléctrico

Property	Temperature	Value
Resistividad eléctrica	23.0 °C	3.45E-7 Ω·m Show Supplier Material materials with Resistividad eléctrica of 3.45E-7 Ω·m
Specific Electrical conductivity		5 % IACS Show Supplier Material materials with Specific Electrical conductivity of 5 % IACS

Technological properties

Property
Application areas	Some applications for this alloy are Belleville washers for fire protection sprinkler heads, thermostats, bellows, diaphragms, connectors and burn-in and test sockets electrical /electronic systems.
Plating	Alloy 360 strip when properly cleaned exhibits surface chemistry characteristics similar to other commercial nickel base alloys. Techniques and procedures for plating and joining commercial nickel base alloys can be used on nickel beryllium.
Workability	Very Good - Used for moderately drawn and severely cupped parts; can be formed to a 90° angle around a radius

Alloy 360 MH8 (N03360)

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades