EtchMetᵀᴹ TM20 (C17200) Strip

Want to keep this datasheet? Save it now in your required format

Description

EtchMet alloy is a material that is tailor made for the springs in voice coil motors and optical image stabilization systems common in smart phone cameras. These devices have a relatively large mass (lense) suspended by extremely small, thin springs. The small size of the springs requires very high strength material to withstand shock loads when the phone is dropped or deliberately tapped against an NFC reader. Therefore, the springs must be made from a very robust material. Furthermore, the lack of a damping mechanism makes high spring stiffness important to combat vibration. EtchMet alloy provides a number of advantages that make it the ideal material for this application:

It has a uniform elastic modulus across all thicknesses/diameters and from product form to product form. This provides consistent stiffness and damping behavior which makes spring calculations easy.

It has a very high resilience allowing it to withstand impact loads without fracturing or permanently deforming.

It has high fatigue strength to withstand many drops and actuation cycles.

It has a uniform, primarily single-phase microstructure, which photochemically machines easily and cleanly for uniform edges free of stress risers.

It is supplied fully precipitation hardened so no further heat treatment is required.

It solders and welds readily.

EtchMet strip is inherently flat with minimal coil set, which helps with alignment during photochemical machining.

Los datos sobre este material han sido proporcionados por Materion Brush GmbH.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	23.0 °C	8.36 g/cm³ Show Supplier Material materials with Densidad of 8.36 g/cm³

Medidas

Property	Value
Ancho	1.27 - 406.5 mm Show Supplier Material materials with Ancho of 1.27 - 406.5 mm
Espesor	0.03 - 0.05 mm Show Supplier Material materials with Espesor of 0.03 - 0.05 mm

Mecánica

Property	Temperature	Value	Comment
Dureza Vickers	23.0 °C	375 [-] Show Supplier Material materials with Dureza Vickers of 375 [-]	min.
Elongación	23.0 °C	1 % Show Supplier Material materials with Elongación of 1 %	min.
Límite elástico Rp 0,2	23.0 °C	1344 MPa Show Supplier Material materials with Límite elástico Rp 0,2 of 1344 MPa	min.
Módulo elástico	23.0 °C	131 GPa Show Supplier Material materials with Módulo elástico of 131 GPa
Resistencia a la tracción	23.0 °C	1379 MPa Show Supplier Material materials with Resistencia a la tracción of 1379 MPa	min.

Aplicaciones térmicas

Property	Temperature	Value
Coeficiente de dilatación térmica	23.0 °C	1.75E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.75E-5 1/K
Conductividad térmica	23.0 °C	105 W/(m·K) Show Supplier Material materials with Conductividad térmica of 105 W/(m·K)

Eléctrico

Property	Temperature	Value
Resistividad eléctrica	23.0 °C	6.2E-6 - 1.01E-5 Ω·m Show Supplier Material materials with Resistividad eléctrica of 6.2E-6 - 1.01E-5 Ω·m
Specific Electrical conductivity		17 - 28 % IACS Show Supplier Material materials with Specific Electrical conductivity of 17 - 28 % IACS

Magnético

Property	Temperature	Value	Comment
Permeabilidad magnética relativa	23.0 °C	1 [-] Show Supplier Material materials with Permeabilidad magnética relativa of 1 [-]	max.

Technological properties

Property
Application areas	EtchMet alloy is a material that is tailor made for the springs in voice coil motors and optical image stabilization systems common in smart phone cameras.

EtchMetᵀᴹ TM20 (C17200) Strip

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades