EN 10327 Grade DX54D cold rolled

View suppliers (13)
Want to keep this datasheet? Save it now in your required format

Description

The alloyed high-grade steel DX54D (extra deep drawing quality) is deliverable with following hot-dip coatings: DX54D+Z (coating Zn), DX54D+ZF (coating Zn-Fe), DX54D+ZA (coating Zn-Al), DX54D+AZ (coating Al-Zn), DX54D+AS (coating Al-Si). The coating mass for Z amounts to 100, 140, 200, (225), 275 g/m², for ZF to 100, 120 and (140)** g/m², for ZA to 95, 130, 185, 200, 255 and 300* g/m², for AZ to 100, 150 and 185 g/m², for AS it amounts to 60, 80, 100, (120) und (150) g/m². The parenthesis values are deliverable after arrangement the values are in each case both side minimum values (three-faced specimen). The * marked values are not deliverable for the surface types B and C and the ** marked values are not deliverable for the surface type C (see also DIN EN 10327). The advantages in opposite to the hot-dip galvanising are: - higher corrosion resistance - excellent forming behaviour - low crack susceptibility of the coating The material is used for construction parts with good cold formability and high corrosion resistance. The coated steel is weldable with the usual methods. Furthermore are given the adhesive suitability and the coatability with organic materials, in each case after a previous suitable surface treatment. Application: household appliances industry, construction industry, furniture industry, electrical engineering, automotive engineering

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueComment

Densidad

23.0 °C

7.8 - 7.9 g/cm³

Show Material materials with Densidad of 7.8 - 7.9 g/cm³

Typical for Low Carbon Steel

Mecánica

PropertyTemperatureValueComment

Coeficiente de Poisson

23.0 °C

0.29 [-]

Show Material materials with Coeficiente de Poisson of 0.29 [-]

Typical for Low Carbon Steel

Elongación A80 transversal

20.0 °C

34 - 36 %

Show Material materials with Elongación A80 transversal of 34 - 36 %

Límite elástico transversal

20.0 °C

120 - 220 MPa

Show Material materials with Límite elástico transversal of 120 - 220 MPa

Módulo de cizallamiento

23.0 °C

82 GPa

Show Material materials with Módulo de cizallamiento of 82 GPa

Typical for Low Carbon Steel

Módulo elástico

23.0 °C

200 - 215 GPa

Show Material materials with Módulo elástico of 200 - 215 GPa

Typical for Low Carbon Steel

Resistencia a la tracción transversal

20.0 °C

260 - 350 MPa

Show Material materials with Resistencia a la tracción transversal of 260 - 350 MPa

Aplicaciones térmicas

PropertyTemperatureValueComment

Calor específico

23.0 °C

465 J/(kg·K)

Show Material materials with Calor específico of 465 J/(kg·K)

Typical for Low Carbon Steel

Coeficiente de dilatación térmica

23.0 °C

1.32E-5 - 1.38E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.32E-5 - 1.38E-5 1/K

Typical for Low Carbon Steel

Conductividad térmica

23.0 °C

25 - 93 W/(m·K)

Show Material materials with Conductividad térmica of 25 - 93 W/(m·K)

Typical for Low Carbon Steel

Temperatura de fusión

1480 - 1526 °C

Show Material materials with Temperatura de fusión of 1480 - 1526 °C

Typical for Low Carbon Steel

Temperatura máx. de funcionamiento

500 °C

Show Material materials with Temperatura máx. de funcionamiento of 500 °C

Typical for Carbon Steel

Eléctrico

PropertyTemperatureValueComment

Resistividad eléctrica

23.0 °C

1.43E-7 - 1.74E-7 Ω·m

Show Material materials with Resistividad eléctrica of 1.43E-7 - 1.74E-7 Ω·m

Typical for Carbon Steel

Magnético

PropertyValueComment

Temperatura de Curie

770 °C

Show Material materials with Temperatura de Curie of 770 °C

Typical for Low Carbon Steel

Chemical properties

PropertyValue

Azufre

0.045 %

Show Material materials with Azufre of 0.045 %

Carbono

0.12 %

Show Material materials with Carbono of 0.12 %

Fósforo

0.1 %

Show Material materials with Fósforo of 0.1 %

Manganeso

0.6 %

Show Material materials with Manganeso of 0.6 %

Silicona

0.5 %

Show Material materials with Silicona of 0.5 %

Titanio

0.3 %

Show Material materials with Titanio of 0.3 %