Phenolic MC514MG - Sheet

Nombres alternativos y comerciales
U.L. LISTED: N
Want to keep this datasheet? Save it now in your required format

Description

MC514MG is a glass phenolic, semi-conductive laminate which was designed for corona discharge in the power generation industry. The graphitic carbon additive in the resin system enables easy installation in the slots and provides the necessary conductivity to safely remove harmful charges from the system.

Los datos sobre este material han sido proporcionados por Norplex Micarta.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyValueTesting StandardComment

Bonding strength

499 Kg

Show Supplier Material materials with Bonding strength of 499 Kg

ASTM D229

Condition A

Densidad

1.8 g/cm³

Show Supplier Material materials with Densidad of 1.8 g/cm³

ASTM D792

Mecánica

PropertyValueTesting StandardComment

Dureza Rockwell M

110 [-]

Show Supplier Material materials with Dureza Rockwell M of 110 [-]

ASTM D785

Resistencia a la compresión

330.9 MPa

Show Supplier Material materials with Resistencia a la compresión of 330.9 MPa

ASTM D695

Condition A | Flatwise

Resistencia a la flexión

172.4 MPa

Show Supplier Material materials with Resistencia a la flexión of 172.4 MPa

ASTM D790

Condition A, Transverse

234.4 MPa

Show Supplier Material materials with Resistencia a la flexión of 234.4 MPa

ASTM D790

Condition A

Aplicaciones térmicas

PropertyValueComment

Relative temperature index, mechanical strength

155 °C

Show Supplier Material materials with Relative temperature index, mechanical strength of 155 °C

UL Bulletin 746b¹

Eléctrico

PropertyValueTesting Standard

Surface resistivity

400 - 20000 Ω/sq

Show Supplier Material materials with Surface resistivity of 400 - 20000 Ω/sq

ASTM D257

Technological properties

Property
Fillers

Glass Fabric

Other

1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use.

Supplier Disclaimer

This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values".


To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest.


It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.