Epoxy RM271 - Rod

Nombres alternativos y comerciales
U.L. LISTED: N
Want to keep this datasheet? Save it now in your required format

Description

Rolled and Molded Rods made from a glass fabric with a high temperature epoxy resin system.

Los datos sobre este material han sido proporcionados por Norplex Micarta.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyValueTesting StandardComment

Densidad

1.8 g/cm³

Show Supplier Material materials with Densidad of 1.8 g/cm³

ASTM D349

Moisture absorption

0.06 %

Show Supplier Material materials with Moisture absorption of 0.06 %

ASTM D349

Condition D₁-24/23

Mecánica

PropertyValueTesting StandardComment

Dureza Rockwell M

110 [-]

Show Supplier Material materials with Dureza Rockwell M of 110 [-]

ASTM D349

Módulo de compresión

8.6 GPa

Show Supplier Material materials with Módulo de compresión of 8.6 GPa

ASTM D349

Condition A

Resistencia a la compresión

499.9 MPa

Show Supplier Material materials with Resistencia a la compresión of 499.9 MPa

ASTM D349

Condition A

Resistencia a la flexión

568.8 MPa

Show Supplier Material materials with Resistencia a la flexión of 568.8 MPa

ASTM D349

Condition A

Resistencia a la tracción

344.7 MPa

Show Supplier Material materials with Resistencia a la tracción of 344.7 MPa

ASTM D349

Condition A

Aplicaciones térmicas

PropertyValue

Inflamabilidad

UL 94, Class HB

Technological properties

Property
Application areas

RM271 is used in applications requiring low moisture absorption.

Fillers

Glass Fabric

Other

The mechanical properties are converted from American unit system to International unit system.

Supplier Disclaimer

This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values".


To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest.


It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.