Phenolic NP324FR - Sheet

Nombres alternativos y comerciales
U.L. LISTED: N
Want to keep this datasheet? Save it now in your required format

Description

NP324FR is a fine weave cotton fabric which has been bleached to remove impurities, and a modified phenolic resin with powdered PTFE added for lubrication as well as a flame retardant. It has low moisture absorption and excellent dimensional stability. NP324FR provides excellent machining characteristics.

Los datos sobre este material han sido proporcionados por Norplex Micarta.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyValueComment

Bonding strength

521.6 Kg

Show Supplier Material materials with Bonding strength of 521.6 Kg

Condition D-48/50

557.9 Kg

Show Supplier Material materials with Bonding strength of 557.9 Kg

Condition A

Moisture absorption

1.51 %

Show Supplier Material materials with Moisture absorption of 1.51 %

Condition D₁-24/23

Mecánica

PropertyValueComment

Impact strength, Izod notched, ASTM

106.8 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 106.8 J/m

Condition E-48/50, Transverse

117.4 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 117.4 J/m

Condition E-48/50

Resistencia a la flexión

144.8 MPa

Show Supplier Material materials with Resistencia a la flexión of 144.8 MPa

Condition A, Transverse

172.4 MPa

Show Supplier Material materials with Resistencia a la flexión of 172.4 MPa

Condition A

Aplicaciones térmicas

PropertyValue

Inflamabilidad

UL 94, Class HB

Eléctrico

PropertyValueComment

Tensión de ruptura

60 kV

Show Supplier Material materials with Tensión de ruptura of 60 kV

Condition A

Technological properties

Property
Fillers

Cotton Fabric and PTFE

Other

1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use


2.The mechanical properties are converted from American unit system to International unit system.

Supplier Disclaimer

This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values".


To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest.


It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.