Phenolic RM630 - Rod

Nombres alternativos y comerciales
NEMA GRADE: XXX, U.L. LISTED: N
Want to keep this datasheet? Save it now in your required format

Description

Rolled and Molded Rods are made from an alpha paper impregnated with an electrical grade of phenolic resin.

Los datos sobre este material han sido proporcionados por Norplex Micarta.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyValueTesting StandardComment

Densidad

1.4 g/cm³

Show Supplier Material materials with Densidad of 1.4 g/cm³

ASTM D349

Moisture absorption

0.58 %

Show Supplier Material materials with Moisture absorption of 0.58 %

ASTM D349

Condition D₁-24/23

Mecánica

PropertyValueTesting StandardComment

Dureza Rockwell M

100 [-]

Show Supplier Material materials with Dureza Rockwell M of 100 [-]

ASTM D349

Resistencia a la compresión

192.4 MPa

Show Supplier Material materials with Resistencia a la compresión of 192.4 MPa

ASTM D349

Condition A

Resistencia a la flexión

143.4 MPa

Show Supplier Material materials with Resistencia a la flexión of 143.4 MPa

ASTM D349

Condition A

Resistencia a la tracción

105.5 MPa

Show Supplier Material materials with Resistencia a la tracción of 105.5 MPa

ASTM D349

Condition A

Aplicaciones térmicas

PropertyValueComment

Relative temperature index, electrical

140 °C

Show Supplier Material materials with Relative temperature index, electrical of 140 °C

¹

Relative temperature index, mechanical strength

140 °C

Show Supplier Material materials with Relative temperature index, mechanical strength of 140 °C

¹

Inflamabilidad

UL 94, Class HB, Condition A

Technological properties

Property
Application areas

RM630 is used for electrical and mechanical applications, meeting NEMA XXX requirements.

Fillers

Paper

Other

1.This temperature is a recommendation only, and based upon experience in various applications. The maximum operating temperature is dependent upon the application and should be investigated prior to use


2.The mechanical properties are converted from American unit system to International unit system.

Supplier Disclaimer

This data, while believed to be accurate and based on reliable analytical methods, is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are "typical values"; not to be considered "specification values".


To assure the material's performance is adequate for a specific application; customers should verify, independent of Norplex-Micarta, performance characteristics of interest.


It is the responsibility of the users of this information to make sure that they have the latest version of this TDB, and are urged to check with Customer Service or, preferably our web site, www.norplex-micarta.com, to determine if the information is the most current available.