General
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of friction | 0.39 - 0.48 [-] Show Supplier Material materials with Coefficient of friction of 0.39 - 0.48 [-] | ||
Coefficient of friction, kinetic | 0.39 [-] Show Supplier Material materials with Coefficient of friction, kinetic of 0.39 [-] | ASTM D 3702 Modified: Manual | |
Coefficient of friction, static | 0.48 [-] Show Supplier Material materials with Coefficient of friction, static of 0.48 [-] | ASTM D 3702 Modified: Manual | |
Densidad | 23.0 °C | 1.49 g/cm³ Show Supplier Material materials with Densidad of 1.49 g/cm³ | ISO 1183 |
Mecánica
Property | Temperature | Value | Comment |
---|---|---|---|
Elongación | 23.0 °C | 1.2 % Show Supplier Material materials with Elongación of 1.2 % | ISO 527 | break |
Módulo de flexión | 23.0 °C | 19.2 GPa Show Supplier Material materials with Módulo de flexión of 19.2 GPa | ASTM D 790 |
Módulo elástico | 23.0 °C | 21.6 GPa Show Supplier Material materials with Módulo elástico of 21.6 GPa | ISO 527 | 1 mm/min |
Resistencia a la flexión | 23.0 °C | 230 MPa Show Supplier Material materials with Resistencia a la flexión of 230 MPa | ASTM D 790 |
Resistencia a la tracción | 23.0 °C | 160 MPa Show Supplier Material materials with Resistencia a la tracción of 160 MPa | ISO 527 | break, 5 mm/min |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 7 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 7 kJ/m² | ISO 180/1A | notched 80*10*3, -40°C |
Resistencia al choque, ensayo Izod no entallado | 23.0 °C | 18 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod no entallado of 18 kJ/m² | ISO 180/1U | 80*10*4, 23°C |
Eléctrico
Property | Temperature | Value | Comment |
---|---|---|---|
Sheet resistivity, ROA | 23.0 °C | 10 - 1000000 Ω Show Supplier Material materials with Sheet resistivity, ROA of 10 - 1000000 Ω | ASTM D 257 |
Rheological Properties
Technological properties
Property | ||
---|---|---|
Application areas | Enclosure/Housing/Cover | |
Availability | Europe,Asia,Americas | |
Processing methods | Mold Temperature: 140 to 180.0°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |