Propiedades
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of friction | 0.28 - 0.56 [-] Show Supplier Material materials with Coefficient of friction of 0.28 - 0.56 [-] | ||
Coefficient of friction, kinetic | 0.28 [-] Show Supplier Material materials with Coefficient of friction, kinetic of 0.28 [-] | ASTM D 3702 Modified: Instr. | |
Coefficient of friction, static | 0.56 [-] Show Supplier Material materials with Coefficient of friction, static of 0.56 [-] | ASTM D 3702 Modified: Instr. | |
Densidad | 23.0 °C | 1.43 g/cm³ Show Supplier Material materials with Densidad of 1.43 g/cm³ | ASTM D 792 |
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongación | 23.0 °C | 2 % Show Supplier Material materials with Elongación of 2 % | ASTM D 638 | break |
Módulo de flexión | 23.0 °C | 10.3 GPa Show Supplier Material materials with Módulo de flexión of 10.3 GPa | ASTM D 790 |
Módulo elástico | 23.0 °C | 11 GPa Show Supplier Material materials with Módulo elástico of 11 GPa | ASTM D 638 | 50 mm/min |
Resistencia a la flexión | 23.0 °C | 206 MPa Show Supplier Material materials with Resistencia a la flexión of 206 MPa | ASTM D 790 |
Resistencia a la tracción | 23.0 °C | 139 MPa Show Supplier Material materials with Resistencia a la tracción of 139 MPa | ASTM D 638 | break |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 58 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 58 kJ/m² | ASTM D 256 | notched, 23°C |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Security/Detection, Energy Management, Data Management | |
| Availability | Europe,Asia,Americas | |
| Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |