General
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of friction | 0.39 - 0.41 [-] Show Supplier Material materials with Coefficient of friction of 0.39 - 0.41 [-] | ||
Coefficient of friction, kinetic | 0.41 [-] Show Supplier Material materials with Coefficient of friction, kinetic of 0.41 [-] | ASTM D 3702 Modified: Manual | |
Coefficient of friction, static | 0.39 [-] Show Supplier Material materials with Coefficient of friction, static of 0.39 [-] | ASTM D 3702 Modified: Manual | |
Densidad | 23.0 °C | 1.32 g/cm³ Show Supplier Material materials with Densidad of 1.32 g/cm³ | ASTM D 792 |
Moisture absorption | 23.0 °C | 0.1 % Show Supplier Material materials with Moisture absorption of 0.1 % | ASTM D 570 | (23°C/50% RH/24 hrs) |
Mecánica
Property | Temperature | Value | Comment |
---|---|---|---|
Elongación | 23.0 °C | 2.8 % Show Supplier Material materials with Elongación of 2.8 % | ASTM D 638 | break |
Impact strength, Izod notched, ASTM | 23.0 °C | 181 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 181 J/m | ASTM D 256 |
Impact strength, Izod unnotched, ASTM | 23.0 °C | 758 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 758 J/m | ASTM D 4812 | 23°C |
Módulo de flexión | 23.0 °C | 6 GPa Show Supplier Material materials with Módulo de flexión of 6 GPa | ASTM D 790 |
Módulo elástico | 23.0 °C | 6.8 GPa Show Supplier Material materials with Módulo elástico of 6.8 GPa | ASTM D 638 | 50 mm/min |
Resistencia a la flexión | 23.0 °C | 158 MPa Show Supplier Material materials with Resistencia a la flexión of 158 MPa | ASTM D 790 |
Resistencia a la tracción | 23.0 °C | 105 MPa Show Supplier Material materials with Resistencia a la tracción of 105 MPa | ASTM D 638 | break |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 181 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 181 kJ/m² | ASTM D 256 | notched, 23°C |
Aplicaciones térmicas
Property | Temperature | Value | Comment |
---|---|---|---|
Coeficiente de dilatación térmica | 23.0 °C | 6.84E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 6.84E-5 1/K | ASTM E 831 | -40°C to 40°C |
Coeficiente de dilatación térmica transversal | 23.0 °C | 7.38E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 7.38E-5 1/K | ASTM E 831 | -40°C to 40°C |
Conductividad térmica | 23.0 °C | 0.25 W/(m·K) Show Supplier Material materials with Conductividad térmica of 0.25 W/(m·K) | ASTM E 1530 | |
Heat deflection temperature, 0.45 MPa | 142 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 142 °C | ASTM D 648 | 3.2 mm, unannealed | |
Heat deflection temperature, 1.80 MPa | 137 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 137 °C | ASTM D 648 | 3.2mm, unannealed | |
Temperatura de flexión bajo carga | 137 - 142 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 137 - 142 °C |
Rheological Properties
Technological properties
Property | ||
---|---|---|
Application areas | Medical Device, Surgical Devices | |
Availability | Europe,Asia,Americas | |
Processing methods | Drying Temperature: 100°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |