Propiedades
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Densidad | 23.0 °C | 1.16 g/cm³ Show Supplier Material materials with Densidad of 1.16 g/cm³ | ASTM D 792 |
Moisture absorption | 23.0 °C | 0.7 % Show Supplier Material materials with Moisture absorption of 0.7 % | ISO 62 | (23°C / 50% RH) |
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongación | 23.0 °C | 140 % Show Supplier Material materials with Elongación of 140 % | ISO 527 | break, 5 mm/min |
Impact strength, Izod notched, ASTM | 23.0 °C | 580 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 580 J/m | ASTM D 256 | notched, 23°C |
Módulo de flexión | 23.0 °C | 1.2 GPa Show Supplier Material materials with Módulo de flexión of 1.2 GPa | ISO 178 | 2 mm/min |
Módulo elástico | 23.0 °C | 1.2 GPa Show Supplier Material materials with Módulo elástico of 1.2 GPa | ISO 527 | 1 mm/min |
Resistencia a la flexión | 23.0 °C | 52 MPa Show Supplier Material materials with Resistencia a la flexión of 52 MPa | ASTM D 790 | brk, 1.3 mm/min, 50 mm span |
Resistencia a la tracción | 23.0 °C | 34 MPa Show Supplier Material materials with Resistencia a la tracción of 34 MPa | ISO 527 | yield, 5 mm/min |
Resistencia al choque, ensayo Charpy entallado | 23.0 °C | 69 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 69 kJ/m² | ISO 179/2C | 23°C |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 580 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 580 kJ/m² | ASTM D 256 | notched, 23°C |
Aplicaciones térmicas
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coeficiente de dilatación térmica | 23.0 °C | 1.2E-4 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.2E-4 1/K | ISO 11359-2 | 23°C to 60°C |
Coeficiente de dilatación térmica transversal | 23.0 °C | 1.4E-4 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 1.4E-4 1/K | ISO 11359-2 | 23°C to 60°C |
Heat deflection temperature, 0.45 MPa | 84 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 84 °C | ASTM D 648 | 6.4 mm, unannealed | |
Heat deflection temperature, 1.80 MPa | 75 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 75 °C | ASTM D 648 | 6.4 mm, unannealed | |
Temperatura de flexión bajo carga | 75 - 84 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 75 - 84 °C |
Eléctrico
| Property | Temperature | Value | Comment |
|---|---|---|---|
Sheet resistivity, ROA | 23.0 °C | 9.00E+9 - 4.00E+11 Ω Show Supplier Material materials with Sheet resistivity, ROA of 9.00E+9 - 4.00E+11 Ω | ASTM D 257 |
Volume resistivity | 23.0 °C | 8.00E+9 - 3.00E+11 Ω·cm Show Supplier Material materials with Volume resistivity of 8.00E+9 - 3.00E+11 Ω·cm | ASTM D 257 |
Óptico
Rheological Properties
Technological properties
| Property | ||
|---|---|---|
| Application areas | Enclosure/Housing/Cover, Electronic Material Handling, Data Management, Semiconductor, LED Lighting, Wireless Communications | |
| Availability | Europe,Asia,Americas | |
| Processing methods | Drying Temperature: 90 to 95.0°C | |
| Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |