LNP™ LUBRICOMP™ Compound SP003 - Americas

Want to keep this datasheet? Save it now in your required format

Description

LNP LUBRICOMP SP003 is a compound based on Nylon 12 resin containing 15% PTFE/Silicone. Added feature of this material is: Wear Resistant.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	1.09 g/cm³ Show Supplier Material materials with Densidad of 1.09 g/cm³	ISO 1183

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	32.9 % Show Supplier Material materials with Elongación of 32.9 %	ISO 527 \| break
Módulo de flexión	23.0 °C	1.3 GPa Show Supplier Material materials with Módulo de flexión of 1.3 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	1.6 GPa Show Supplier Material materials with Módulo elástico of 1.6 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	45 MPa Show Supplier Material materials with Resistencia a la flexión of 45 MPa	ISO 178 \| break, 2 mm/min
Resistencia a la tracción	23.0 °C	36 MPa Show Supplier Material materials with Resistencia a la tracción of 36 MPa	ISO 527 \| break
Resistencia al choque, ensayo Izod entallado	23.0 °C	4 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 4 kJ/m²	ISO 180/1A \| notched 80104, 23°C
Resistencia al choque, ensayo Izod no entallado	23.0 °C	48 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod no entallado of 48 kJ/m²	ISO 180/1U \| 80104, 23°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	1.12E-4 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.12E-4 1/K	ISO 11359-2 \| -40°C to 40°C
Coeficiente de dilatación térmica transversal	23.0 °C	1.4E-4 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 1.4E-4 1/K	ISO 11359-2 \| 23°C to 60°C
Heat deflection temperature, 0.45 MPa		134 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 134 °C	ISO 75/Bf \| Flatw 80104 sp=64mm
Temperatura de flexión bajo carga		134 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 134 °C

Technological properties

Property
Availability	Europe,Asia,Americas
Processing methods	Melt Temperature: 225 to 240.0°C Mold Temperature: 70 to 80.0°C Screw Speed: 30 to 60.0rpm Maximum Moisture Content: 0.12 to 0.2% Rear - Zone 1 Temperature: 215 to 225.0°C Middle - Zone 2 Temperature: 220 to 230.0°C Front - Zone 3 Temperature: 225 to 240.0°C Drying Time: 4hrs Drying Temperature: 80°C Back Pressure: 0.2 to 0.3MPa
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.