Propiedades
General
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongación | 23.0 °C | 3 % Show Supplier Material materials with Elongación of 3 % | ISO 527 | brk, Type I, 5 mm/min |
Impact strength, Izod notched, ASTM | 23.0 °C | 25 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 25 J/m | ASTM D 256 | notched, 23°C |
Impact strength, Izod unnotched, ASTM | 23.0 °C | 90 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 90 J/m | ASTM D 256 | un-notched, 23°C |
Módulo de flexión | 23.0 °C | 2.3 GPa Show Supplier Material materials with Módulo de flexión of 2.3 GPa | ISO 178 |
Módulo elástico | 23.0 °C | 2 GPa Show Supplier Material materials with Módulo elástico of 2 GPa | ISO 527 | brk, Type I, 5 mm/min |
Resistencia a la flexión | 23.0 °C | 110 MPa Show Supplier Material materials with Resistencia a la flexión of 110 MPa | ISO 178 | at break |
Resistencia a la tracción | 23.0 °C | 46 MPa Show Supplier Material materials with Resistencia a la tracción of 46 MPa | ISO 527 | brk, Type I, 5 mm/min |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 3 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 3 kJ/m² | ISO 180/1A | notched, 23°C |
Resistencia al choque, ensayo Izod no entallado | 23.0 °C | 12 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod no entallado of 12 kJ/m² | ISO 180/1U | un-notched, 23°C |
Aplicaciones térmicas
| Property | Value | Comment | |
|---|---|---|---|
Heat deflection temperature, 1.80 MPa | 230 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 230 °C | ISO 75/Af | Flatw 80*10*4 sp=64mm | |
Temperatura de flexión bajo carga | 230 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 230 °C | ||
Inflamabilidad | UL94 Flame Class Rating: V-0- UL 94 | ||
Technological properties
| Property | ||
|---|---|---|
| Application areas | Fused Deposition Modeling (FDM), Additive Plastic | |
| Availability | Europe,Americas | |
| Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |