Propiedades
General
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongación | 23.0 °C | 10 % Show Supplier Material materials with Elongación of 10 % | SABIC - Japan Method | break |
Impact strength, Izod notched, ASTM | 23.0 °C | 88 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 88 J/m | ASTM D 256 | notched, 23°C |
Módulo de flexión | 23.0 °C | 8.4 GPa Show Supplier Material materials with Módulo de flexión of 8.4 GPa | ASTM D 790 |
Resistencia a la flexión | 23.0 °C | 216 MPa Show Supplier Material materials with Resistencia a la flexión of 216 MPa | ASTM D 790 |
Resistencia a la tracción | 23.0 °C | 157 MPa Show Supplier Material materials with Resistencia a la tracción of 157 MPa | SABIC - Japan Method | yield |
Resistencia al choque, ensayo Izod entallado | 23.0 °C | 88 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 88 kJ/m² | ASTM D 256 | notched, 23°C |
Aplicaciones térmicas
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coeficiente de dilatación térmica | 23.0 °C | 3E-5 - 5E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 3E-5 - 5E-5 1/K | TMA | -30°C to 30°C |
Heat deflection temperature, 1.80 MPa | 230 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 230 °C | ASTM D 648 | 6.4 mm, unannealed | |
Temperatura de flexión bajo carga | 230 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 230 °C |
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Contracción | 23.0 °C | 0.3 % Show Supplier Material materials with Contracción of 0.3 % | SABIC method | 3.2 mm |
Velocidad de flujo de la masa derretida | 24.2 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 24.2 g/10min | ASTM D 1238 | 280°C/5.0 kgf |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Personal Computing, Electronic Components, Auto Electrical, Document Handling | |
| Availability | Asia | |
| Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |