NORYL GTX™ Resin GTX820 - Americas

Want to keep this datasheet? Save it now in your required format

Description

NORYL GTX™ 820 resin is a 20% glass reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade has high stiffness (flexural modulus 4000 MPa), excellent chemical resistance, and high heat resistance. NORYL GTX GTX830 resin is an excellent candidate for a wide variety of applications including valves for water management.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Ingeniería eléctrica

Automotriz

Piezas generales para vehículos

Exterior automotriz

Construcción

Water Management

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.5 % Show Supplier Material materials with Absorción de agua of 0.5 %	ASTM D 570 \| (23°C/24hrs)
Densidad	23.0 °C	1.245 g/cm³ Show Supplier Material materials with Densidad of 1.245 g/cm³	ASTM D 792
Moisture absorption	23.0 °C	1 % Show Supplier Material materials with Moisture absorption of 1 %	ASTM D 570 \| (23°C/50% RH/24 hrs)

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	7 % Show Supplier Material materials with Elongación of 7 %	ASTM D 638 \| brk, Type I, 5 mm/min
Módulo de flexión	23.0 °C	6 GPa Show Supplier Material materials with Módulo de flexión of 6 GPa	ASTM D 790 \| 2.6 mm/min, 100 mm span
Resistencia a la flexión	23.0 °C	194 MPa Show Supplier Material materials with Resistencia a la flexión of 194 MPa	ASTM D 790 \| yld, 2.6 mm/min, 100 mm span
Resistencia a la tracción	23.0 °C	117 MPa Show Supplier Material materials with Resistencia a la tracción of 117 MPa	ASTM D 638 \| brk, Type I, 5 mm/min

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	3.06E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 3.06E-5 1/K	ASTM E 831 \| -20°C to 150°C
Temperatura de reblandecimiento Vicat		248 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 248 °C	ASTM D 1525 \| Rate B/50

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.3 % Show Supplier Material materials with Contracción of 0.3 %	SABIC method \| on tensile bar

Technological properties

Property
Application areas	Pump, Heavy Vehicles, Electronic Components, Auto Aftermarket
Availability	Asia,Americas
Processing methods	Vent Depth: 0.013 to 0.038mm Drying Time: 3 to 4.0hrs Mold Temperature: 75 to 120.0°C Melt Temperature: 280 to 305.0°C Drying Temperature: 95 to 105.0°C Maximum Moisture Content: 0.07% Screw Speed: 20 to 100.0rpm Drying Time (Cumulative): 8hrs Minimum Moisture Content: 0.02% Rear - Zone 1 Temperature: 265 to 305.0°C Nozzle Temperature: 280 to 305.0°C Back Pressure: 0.3 to 1.4MPa Shot to Cylinder Size: 30 to 50.0% Front - Zone 3 Temperature: 275 to 305.0°C Middle - Zone 2 Temperature: 270 to 305.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.