Propiedades
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Absorción de agua | 23.0 °C | 3.2 % Show Supplier Material materials with Absorción de agua of 3.2 % | ISO 62-1 | (23°C/saturated) |
Densidad | 23.0 °C | 1.25 g/cm³ Show Supplier Material materials with Densidad of 1.25 g/cm³ | ISO 1183 |
Moisture absorption | 23.0 °C | 1.08 % Show Supplier Material materials with Moisture absorption of 1.08 % | ISO 62 | (23°C / 50% RH) |
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongación | 23.0 °C | 2.5 % Show Supplier Material materials with Elongación of 2.5 % | ISO 527 | yield, 5 mm/min |
Módulo de flexión | 23.0 °C | 5.2 GPa Show Supplier Material materials with Módulo de flexión of 5.2 GPa | ISO 178 | 2 mm/min |
Resistencia a la flexión | 23.0 °C | 217 MPa Show Supplier Material materials with Resistencia a la flexión of 217 MPa | ISO 178 | break, 2 mm/min |
Resistencia a la tracción | 23.0 °C | 95 MPa Show Supplier Material materials with Resistencia a la tracción of 95 MPa | ISO 527 | break, 5 mm/min |
Aplicaciones térmicas
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coeficiente de dilatación térmica | 23.0 °C | 3E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 3E-5 1/K | ISO 11359-2 | 23°C to 60°C |
Temperatura de reblandecimiento Vicat | 252 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 252 °C | ISO 306 | Rate A/50 |
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Contracción | 23.0 °C | 0.4 % Show Supplier Material materials with Contracción of 0.4 % | SABIC method | 3.2 mm |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Pump, Heavy Vehicles, Electronic Components, Auto Aftermarket | |
| Availability | Asia,Americas | |
| Processing methods | Drying Temperature: 100 to 110.0°C | |
| Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |