LNP™ STAT-KON™ Compound EX12310C

Want to keep this datasheet? Save it now in your required format

Description

LNP STAT-KON EX12310C is an Electrical Conductive thermoplastic compound featuring Electrostatic Discharge (ESD) Safe performance based on a unique Ultra Clean Polyetherimide resin reinforced with 10% carbon fiber. This compound provides good stiffness, dimension stability and has extremely high level of cleanliness for the most demanding applications in the Hard Disk Drive and Semiconductor Industry. A unique feature of this material is its low C18-C40 hydrocarbons and this compound is manufactured using the LNP Clean Compounding Solution (CCS) Technology.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Usos

Electrónica

Pantallas

Materiales de este proveedor

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Ver todos los materiales de este proveedor

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	0.25 % Show Supplier Material materials with Absorción de agua of 0.25 %	ASTM D 570 \| (23°C/24hrs)
Densidad	23.0 °C	1.31 g/cm³ Show Supplier Material materials with Densidad of 1.31 g/cm³	ISO 1183 \| (Molded)

Mecánica

Property	Temperature	Value	Comment
Elongación	23.0 °C	2.3 % Show Supplier Material materials with Elongación of 2.3 %	ISO 527 \| break, 5 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	32 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 32 J/m	ASTM D 256
Módulo de flexión	23.0 °C	8.4 GPa Show Supplier Material materials with Módulo de flexión of 8.4 GPa	ISO 178 \| 2 mm/min
Módulo elástico	23.0 °C	9 GPa Show Supplier Material materials with Módulo elástico of 9 GPa	ISO 527 \| 1 mm/min
Resistencia a la flexión	23.0 °C	225 MPa Show Supplier Material materials with Resistencia a la flexión of 225 MPa	ISO 178 \| break, 2 mm/min
Resistencia a la tracción	23.0 °C	156 MPa Show Supplier Material materials with Resistencia a la tracción of 156 MPa	ISO 527 \| break, 5 mm/min
Resistencia al choque, ensayo Charpy entallado	23.0 °C	3 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 3 kJ/m²	ISO 179/1eA \| 80104mm, Cut, 23°C
Resistencia al choque, ensayo Izod entallado	23.0 °C	32 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 32 kJ/m²	ASTM D 256 \| notched, 23°C

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	23.0 °C	1.56E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.56E-5 1/K	ASTM E 831 \| 40°C to 120°C
Coeficiente de dilatación térmica transversal	23.0 °C	6.25E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica transversal of 6.25E-5 1/K	ASTM E 831 \| 40°C to 120°C
Heat deflection temperature, 1.80 MPa		201 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 201 °C	ISO 75/Af \| Flatw 80104 sp=64mm
Relative temperature index, electrical		105 °C Show Supplier Material materials with Relative temperature index, electrical of 105 °C	UL 746B
Relative temperature index, mechanical impact		105 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 105 °C	UL 746B
Relative temperature index, mechanical strength		105 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 105 °C	UL 746B
Temperatura de flexión bajo carga		201 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 201 °C
Inflamabilidad	UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=101997197- - <br> UL Recognized, 94V-0 Flame Class Rating: ≥0.4mm UL 94

Eléctrico

Property	Temperature	Value	Comment
Sheet resistivity, ROA	23.0 °C	397000 Ω Show Supplier Material materials with Sheet resistivity, ROA of 397000 Ω	ASTM D 257
Volume resistivity	23.0 °C	508000 Ω·cm Show Supplier Material materials with Volume resistivity of 508000 Ω·cm	ASTM D 257

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.2 % Show Supplier Material materials with Contracción of 0.2 %	ASTM D 955 \| 24 hrs
Contracción transversal	23.0 °C	0.5 % Show Supplier Material materials with Contracción transversal of 0.5 %	ASTM D 955 \| 24 hrs
Velocidad de flujo de la masa derretida		31 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 31 g/10min	ASTM D 1238 \| 367°C/6.6 kgf

Technological properties

Property
Application areas	Data Management
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 150°C Drying Time: 4 to 6.0hrs Maximum Moisture Content: 0.02% Melt Temperature: 360 to 400.0°C Nozzle Temperature: 390 to 400.0°C Front - Zone 3 Temperature: 380 to 400.0°C Middle - Zone 2 Temperature: 370 to 390.0°C Rear - Zone 1 Temperature: 360 to 380.0°C Mold Temperature: 140 to 180.0°C Back Pressure: 0.3 to 0.7MPa Vent Depth: 0.025 to 0.076mm Screw speed (Circumferential speed): 0.2 to 0.3m/s
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.