LNP™ THERMOCOMP™ Compound EX11414

Want to keep this datasheet? Save it now in your required format

Description

LNP THERMOCOMP EX11414 is a compound based on Polyetherimide containing 20% Carbon Fiber. Added feature of this grade is: FAR25.853 Compliant.

Los datos sobre este material han sido proporcionados por Sabic.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyTemperatureValueComment

Densidad relativa

23.0 °C

1.33 [-]

Show Supplier Material materials with Densidad relativa of 1.33 [-]

ASTM D 792 |

Moisture absorption

23.0 °C

0.23 %

Show Supplier Material materials with Moisture absorption of 0.23 %

ASTM D 570 | (23°C/50% RH/24 hrs)

Mecánica

PropertyTemperatureValueComment

Coeficiente de Poisson

23.0 °C

0.4 [-]

Show Supplier Material materials with Coeficiente de Poisson of 0.4 [-]

ASTM E 132

Elongación

23.0 °C

1.8 %

Show Supplier Material materials with Elongación of 1.8 %

ASTM D 638 | brk, Type I, 5 mm/min

Impact strength, Izod notched, ASTM

23.0 °C

78 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 78 J/m

ASTM D 256

Impact strength, Izod unnotched, ASTM

23.0 °C

598 J/m

Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 598 J/m

ASTM D 4812 | 23°C

Módulo de flexión

23.0 °C

14.6 GPa

Show Supplier Material materials with Módulo de flexión of 14.6 GPa

ASTM D 790 | 1.3 mm/min, 50 mm span

Módulo elástico

23.0 °C

17.4 GPa

Show Supplier Material materials with Módulo elástico of 17.4 GPa

ASTM D 638 | 5 mm/min

Resistencia a la flexión

23.0 °C

308 MPa

Show Supplier Material materials with Resistencia a la flexión of 308 MPa

ASTM D 790 | brk, 1.3 mm/min, 50 mm span

Resistencia a la tracción

23.0 °C

230 MPa

Show Supplier Material materials with Resistencia a la tracción of 230 MPa

ASTM D 638 | brk, Type I, 5 mm/min

Resistencia al choque, ensayo Izod entallado

23.0 °C

78 kJ/m²

Show Supplier Material materials with Resistencia al choque, ensayo Izod entallado of 78 kJ/m²

ASTM D 256 | notched, 23°C

Aplicaciones térmicas

PropertyValueComment

Heat deflection temperature, 1.80 MPa

213 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 213 °C

ASTM D 648 | 3.2mm, unannealed

Temperatura de flexión bajo carga

213 °C

Show Supplier Material materials with Temperatura de flexión bajo carga of 213 °C

Eléctrico

PropertyTemperatureValueComment

Sheet resistivity, ROA

23.0 °C

10000 - 100000 Ω

Show Supplier Material materials with Sheet resistivity, ROA of 10000 - 100000 Ω

ASTM D 257

Technological properties

Property
Availability

Europe,Asia,Americas

Processing methods

Maximum Moisture Content: 0.02%
Melt Temperature: 360 to 400.0°C
Front - Zone 3 Temperature: 380 to 400.0°C
Middle - Zone 2 Temperature: 370 to 390.0°C
Rear - Zone 1 Temperature: 360 to 380.0°C
Mold Temperature: 140 to 180.0°C
Back Pressure: 0.3 to 0.7MPa
Drying Temperature: 150°C
Drying Time: 4 to 6.0hrs
Nozzle Temperature: 390 to 400.0°C
Screw speed (Circumferential speed): 0.2 to 0.3m/s
Vent Depth: 0.025 to 0.076mm

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.